MAX7323AEE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX7323AEE+ is a specialized eight-bit I/O Expander device that can be used to extend the number of input and output ports in an interface system. It is made up of an array of eight push button inputs and eight open-drain outputs that are capable of handling both digital and analog signals. The device is powered by an operating voltage between 2.5 and 5.5 volts, making it suitable for use in a wide variety of applications and power systems. The MAX7323AEE+ is alsoRoHS compliant, meaning that it does not contain hazardous materials.

The device is designed to interface with buffered, level-shifted, or translated logic signals. It also supports multiple I/O bus interfaces, including I2C, SPI, CMOS, and open-drain buses. This allows for integration with a wide range of microcontroller systems, including those featuring the ARM Cortex-M, the PICmicro, MSP430, and AVR families. Additionally, the MAX7323AEE+ can readily interface with digital signal processors and most embedded systems.

The features of the MAX7323AEE+ include a low-current active-high logic input structure, with programmable logic thresholds; support for programmable logic output states; and an integrated pull-up/pull-down resistor network with programmable time delays. The device also includes an active-low fault output, with latched and non-latched fault modes. This allows fault signals to be automatically generated when input or output conditions fail or when logic is seen on the open-drain bus.

The MAX7323AEE+ also offers integrated thermal protection and fault detection that is designed to protect the device from excessive current draw. This feature provides a reset signal to the host system when the current limit is exceeded. The device has a typical active current of 30uA and a maximum active current of 100uA, making it suitable for low-power operations.

The working principle of the MAX7323AEE+ is based on the bus architecture of the I2C, SPI, CMOS, and Open-Drain interface. When used with an I2C bus, the device acts as a slave, with data transferred between it and the master device on both the SDA and SCL lines. Data is transferred at standard I2C speeds up to 400 kbps. The SPI and CMOS buses require the device to be used as a master, with data transferred on the clock and data lines.

The open-drain bus is used for sensing and controlling of the I/O ports. Data is transferred between the slave device and the MAX7323AEE+ on the data line, with the MAX7323AEE+ controlling the enable and output lines. In this configuration, the MAX7323AEE+ can be used to sense the logic level of the connected devices or to control output devices with several logic states. This allows for the use of the device as a controller for complex systems.

The MAX7323AEE+ can be used in various applications, including handheld devices, remote controls, audio systems, motor controllers, gaming systems, and industrial automation systems. Its compact size, low-power requirements, and support for multiple bus interfaces make it highly suitable for use in embedded systems.

The specific data is subject to PDF, and the above content is for reference