MAX7358EUG+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX7358EUG+ is a special purpose analog switch that is primarily used for data acquisition or a logan linear-to-logarithmic operation. This switch is designed to provide low Ron, high power handling, and ESD protection in a small package. It is suitable for use in a variety of applications such as data acquisition, interface control, latching, and digital-to-analog conversion (DAC).

The MAX7358EUG+ is manufactured using a low-impedance process and is specified to provide low Ron performance at high switching speeds. This switch operates over a wide input voltage range of 1.2V to 5.0V and an input current range of -6.0mA to +6.0mA. It has a switching time of 1.0 µs and a maximum tOFF of 10 µs for continuous operation. The MAX7358EUG+ has an ESD rating of 4KV for both the HBM and CDM modes. It also features short circuit protection on both the input and output terminals.

The MAX7358EUG+ provides low impedance switching and is compatible with both resistor and FET inputs. It features a voltage follower mode, as well as a low power, low-speed, low voltage differential signaling (LVDS) capability for driving longer cables. In addition, the MAX7358EUG+ has a high switching frequency suitable for high-speed applications, such as digital data acquisition.

The MAX7358EUG+ operates with two pins, an input and an output. When the input is low, the switch is off and the output is effectively blocked. When the input is high, the switch is on and the output is driven to the connected voltage. This switch has a very low Heff and is designed to reduce crosstalk and provide low-noise operation.

In addition, the MAX7358EUG+ is suitable for use in applications such as automatic level control, data transmission, and digital measurement. It is well suited for connecting digital instruments to analog devices, such as a wavelength division multiplexer, to acquire accurate analog signals. The MAX7358EUG+ is also suitable for driving multiple light emitting diodes (LEDs) in a sequence to produce a display.

Furthermore, the MAX7358EUG+ is capable of providing logarithmic-to-linear and linear-to-logarithmic operation. For example, the switch can be used to switch between linear and logarithmic scaling. This is typically done by adjusting the input voltage to the chip. Thus, the MAX7358EUG+ can be used for logarithmic-to-linear operation for analog applications, such as in audio amplifiers and speaker systems.

The MAX7358EUG+ is easy to use and can be utilized in a wide variety of applications. It is an ideal solution for interfacing digital equipment to analog signals and for providing level control. This switch is also suitable for driving LEDs, providing accurate data acquisition, and for linear-to-logarithmic and logarithmic-to-linear operation.

The specific data is subject to PDF, and the above content is for reference