MAX748ACWE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Modern circuit design requires increasingly higher levels of integration, performance and functionality. The type of integrated circuit (IC) used to satisfy these requirements is the MAX744ACWE+ voltage regulator, and it is classified as a PMIC (Power Management IC), Voltage Regulator, and DC DC Switching Regulator. In this article, we will discuss the application field and working principle of the MAX744ACWE+.

The MAX744ACWE+ is a complete, high-performance, low-noise, step-down DC-to-DC switching regulator. It employs a single-stage topology with a built-in current-mode control loop, resulting in excellent line and load regulation. The MAX744ACWE+ is available in 8-pin and 10-pin TSSOP packages, as well as a 10-pin USL package, and is ideal for low power applications.

The MAX744ACWE+ offers two selectable output voltage ranges. The lower voltage range is set by user-selectable resistors and can be adjusted from 3V to 1.8V. The higher voltage range is set by an external reference voltage applied to a control pin, and can be adjusted from 6V to 0.8V. The device offers two types of output accuracy options, with an overall accuracy of +/-1%.

Applications for the device include low power system reference voltages, communications equipment, modems and computer systems. It is suitable for powering high-precision analog circuits, as well as for providing precise bias voltages for small signal components. It is also well-suited for providing power to FPGAs, DSPs and microprocessors. The integrated low EMI switching frequency makes it suitable for use in noise-sensitive systems.

In terms of working principle, the MAX744ACWE+ is a control-mode buck-boost synchronous regulator with automatic-mode switching controlled by a dedicated integrated circuit (IC). The input voltage range is from 0.3V to 6V, while the maximum output current is 250mA. The device is powered by an external source, such as a battery or a DC power supply, and the output voltage is regulated by Pulse-Width Modulation (PWM) control logic.

The MAX744ACWE+ employs an on-chip MOSFET to switch the input voltage to ground, creating a regulated output voltage (VOUT). An on-chip error amplifier compares the setpoint voltage (VREF) to the feedback voltage (VFB) and drives the low-side MOSFET. The compensation network ensures stability and the correct operating point for the error amplifier. The cycle-by-cycle current limit circuitry provides protection against over-current conditions.

The MAX744ACWE+ is a high-performance, low-noise DC-to-DC switching regulator, which is ideally suited for a range of low power applications. It offers two selectable output voltage ranges and two types of output accuracy options, with an overall accuracy of +/-1%. The device is well-suited for providing power to FPGAs, DSPs and microprocessors, and is suitable for powering high-precision analog circuits, as well as providing precise bias voltages for small-signal components.

The specific data is subject to PDF, and the above content is for reference