| Allicdata Part #: | MAX901BEPE-ND |
| Manufacturer Part#: |
MAX901BEPE |
| Price: | $ 0.00 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | Maxim Integrated |
| Short Description: | IC COMPARATOR VOLT 16-DIP |
| More Detail: | Comparator General Purpose TTL 16-PDIP |
| DataSheet: |  MAX901BEPE Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Typ): | -- |
| Base Part Number: | MAX901 |
| Supplier Device Package: | 16-PDIP |
| Mounting Type: | Through Hole |
| Package / Case: | 16-DIP (0.300", 7.62mm) |
| Operating Temperature: | -40°C ~ 85°C |
| Hysteresis: | -- |
| Propagation Delay (Max): | -- |
| CMRR, PSRR (Typ): | 82.5dB CMRR, 80dB PSRR |
| Current - Quiescent (Max): | 15mA,12mA,6mA |
| Series: | -- |
| Current - Input Bias (Max): | 10µA @ 5V |
| Voltage - Input Offset (Max): | 4mV @ ±5V |
| Voltage - Supply, Single/Dual (±): | 5 V ~ 10 V, ±2.5 V ~ 5 V |
| Output Type: | TTL |
| Number of Elements: | 4 |
| Type: | General Purpose |
| Part Status: | Active |
| Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A linear-type comparator is a device used to interpolate the desired signal within a certain range. The MAX901BEPE is a linear-type comparator. It is a versatile, cost-effective device that can be used to compare two analog signals to determine if one signal is greater than or less than the other. It also has open-drain output and low current consumption.
The MAX901BEPE is an operational amplifier with two inputs and one output. It is integrated with an adjustable bias voltage generator and two input pins for two analog signals. The output signal will reflect whether the signal at the input is greater than or less than the signal at the other input.
The MAX901BEPE is ideal for applications in systems where the analog signals must be compared quickly and accurately. This could be used to compare a variety of signals such as voltage, temperature, pressure, and more.
The MAX901BEPE working principle is based on the comparison of two analog signals in order to determine the larger one. The input pins on the device are connected to the two signals that are to be compared and the output pin is connected to the power supply or ground. The device then performs the comparison and the output will indicate whether the signal on the left is larger or smaller than the signal on the right.
There are several applications for the MAX901BEPE. It can be used for alarm systems, to detect overvoltage or undervoltage in power supplies, for precision voltage regulation, for temperature monitoring and control, for motion control, for noise and vibration measurement, and for other general signal comparison tasks.
The MAX901BEPE is a powerful, cost-effective and reliable comparator. It is easy to use and can be used to accurately compare two analog signals and indicate whether one is larger or smaller than the other. It is a great choice for applications that require fast, accurate comparisons of analog signals.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| MAX9722AEUE+T | Maxim Integr... | -- | 1000 | IC AMP AUDIO .13W STER 16... |
| MAX9708ETN+TD | Maxim Integr... | 2.63 $ | 1000 | IC AMP AUDIO PWR 42W STER... |
| MAX9779ETI+ | Maxim Integr... | 0.0 $ | 1000 | IC AMP AUDIO PWR 2.6W AB ... |
| MAX98705EWV+T | Maxim Integr... | 0.0 $ | 1000 | IC AMP DGTL INPUT DHT WLP... |
| MAX9022AUA+ | Maxim Integr... | 0.44 $ | 1000 | IC COMPARATOR DUAL 8-UMAX... |
| MAX973EPA+ | Maxim Integr... | 3.33 $ | 5 | IC COMPARATOR OD 8-DIPCom... |
| MAX9101ESA+ | Maxim Integr... | 0.88 $ | 1000 | IC COMPARATOR OD 8-SOICCo... |
| MAX98400BEVKIT+ | Maxim Integr... | 54.25 $ | 1 | KIT EVAL FOR MAX98400BMAX... |
| MAX97000EVKIT+ | Maxim Integr... | 54.25 $ | 1000 | KIT EVALUATION FOR MAX970... |
| MAX907CPA | Maxim Integr... | 0.0 $ | 1000 | IC COMPARATOR TTL DUAL HS... |
| MAX9031AUK-T | Maxim Integr... | 0.0 $ | 1000 | IC COMPARATOR VOLT SGL SO... |
| MAX953EUA+ | Maxim Integr... | 2.3 $ | 1000 | IC OP AMP SS LP 8-UMAXAmp... |
| MAX9610HEXK+T | Maxim Integr... | 0.67 $ | 2500 | IC OPAMP CURR SENSE 60KHZ... |
| MAX9278AGTM+ | Maxim Integr... | 7.16 $ | 116 | IC DESERIALIZER GMSL 48TQ... |
| MAX9272AGTM/V+T | Maxim Integr... | 3.09 $ | 1000 | IC DSERIALIZER 28BIT GMSL... |
| MAX9260GCB+ | Maxim Integr... | 5.57 $ | 1000 | IC DESERIALIZER GMSL 64TQ... |
| MAX913ESA+ | Maxim Integr... | -- | 2109 | IC COMPARATOR TTL SNGL HS... |
| MAX9039BEBT+T | Maxim Integr... | 0.5 $ | 2500 | IC COMPARATOR SNGL 6-UCSP... |
| MAX9257AEVKIT# | Maxim Integr... | 262.54 $ | 3 | KIT EVAL FOR MAX9257A/MAX... |
| MAX96707COAXEVKIT# | Maxim Integr... | 256.96 $ | 1000 | GMSL SERIALIZER WITH HBM ... |
| MAX9524EVKIT+ | Maxim Integr... | 0.0 $ | 1000 | KIT EVAL FOR MAX9524MAX95... |
| MAX9532EVKIT+ | Maxim Integr... | 0.0 $ | 1000 | EVALUATION KIT FOR MAX953... |
| MAX9541EVKIT+ | Maxim Integr... | 0.0 $ | 1000 | EVALUATION KIT FOR MAX954... |
| MAX992ESA+T | Maxim Integr... | -- | 1000 | IC COMPARATOR R-R 8-SOICC... |
| MAX9203ESA+T | Maxim Integr... | 1.09 $ | 1000 | IC COMPARATOR LP 8-SOICCo... |
| MAX9723DETE+ | Maxim Integr... | 0.77 $ | 115 | IC AMP AUDIO .06W STER AB... |
| MAX9692EUB+T | Maxim Integr... | 3.53 $ | 1000 | IC COMP SNGL ECL W/LE 10U... |
| MAX901BESE+T | Maxim Integr... | 6.38 $ | 1000 | IC COMPARATOR VOLT 16-SOI... |
| MAX9144ESD | Maxim Integr... | 0.0 $ | 1000 | IC COMPARATOR QUAD R-R HS... |
IC COMPARATOR QUAD 16SOICComparator with...
IC COMPARATOR REF P-P SC70-5Comparator G...
IC COMPARATOR DUAL ECL 20-PLCCComparator...
IC COMP SNGL 4NS ULTRFAST 8-MSOPComparat...
IC COMPARATOR RSCML 16QFNComparator Gene...
IC COMP DUAL LOW PWR W/REF 8SOICComparat...