MAX908CPD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX908CPD is a single, dual and quad ultra low-power (mW) single-supply CMOS comparators that operate from a single 1.9V to 5.5V power supply. It offers low current, ultra-low-power operation, wide supply voltage range, fast response time and low input bias current. With very low power and fast response time, MAX908CPD is an ideal choice for embedded systems, portable electronics and battery operated devices.

The MAX908CPD operates with a push-pull output, which provides low operational output voltage and fast switching speed. It provides hysteresis of 4 mV typical, which helps to increase output noise immunity and will minimize the effect of external noise. The comparator also features a standard 1.25V reference, as well as a slew rate of 0.6V/µs typically. It has an over temperature shutdown that limits the current to a safe level when the device is under over temperature. The MAX908CPD is a great option for applications that require low-end and high end performance in a small and cost effective package, such as automotive, industrial, and medical applications.

The MAX908CPD is primarily used to compare two analog input signals and provide an output logic that indicates the result of the comparison operation. The output from the MAX908CPD may be used to control or generate digital signals or condition Analog signals for further processing. It provides fast response time for a single-supply operation (typical 2.2µs). The comparator can work with a voltage input range of 0.8V to VDD (1.9V to 5.5V).

The MAX908CPD is an ideal choice for circuit designs requiring low power consumption and fast response time. Its wide supply voltage range allows it to be used in single supply applications such as those found in battery operated systems. Its low input bias current makes the comparator an excellent choice for use with higher capacitance sources. The MAX908CPD has a maximum gain of +13V/V when operating at the maximum input ranges.

The MAX908CPD is commonly used as an open-loop comparator whose output is a logic voltage that indicates the result of the comparison. It is often used in applications such as waveform shaping and limiting, amplitude comparators, and in applications requiring fast switching of logic levels.

The MAX908CPD comparator features very low power consumption, fast response time, and a low input bias current. It operates from a single 1.9V to 5.5V power supply and is suitable for applications where low power is critical. The low power and fast response time make the MAX908CPD an ideal choice for embedded systems, portable electronics, and battery operated devices.

The MAX908CPD is a linear comparator that is designed to compare two analog input signals and produce an output logic level that indicates the result of the comparison operation. The output from the comparator may be used to control or generate digital signals or condition analog signals for further processing. The comparator is designed to operate with very low power and low input bias current, which makes it an ideal choice for applications requiring low power consumption and fast response time.

The specific data is subject to PDF, and the above content is for reference