MAX9203ESA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear comparators are a type of active component used in analog circuit design to compare two voltages and give an output with a certain logic level. The MAX9203ESA is an example of such a component, a single rail-to-rail comparator with a wide input common mode allowed by its low voltage single supply operation. This component can be used to detect under/overvoltage conditions and can be used in a wide array of applications ranging from portable electronics to medical instruments.

The MAX9203ESA has two inputs, the non-inverting input (IN+), and the inverting input (IN-). It has one output, OUT, which provides the output of the comparator, as well as a power supply voltage (VCC) of operation, and a ground terminal (GND). This component is capable of operation from a single supply voltage from 2.7V up to 36V and has a wide input common mode range of -1.4V to VCC+0.4V. Furthermore, it has a wide working temperature range from -40°C to +125°C.

The MAX9203ESA is a CMOS digital-output comparator, therefore it is built using complementary MOS (CMOS) transistors structures over a silicon substrate. This component has a guaranteed typical response time of 15ns. The voltage difference between the inputs is compared to a reference voltage and the output changes accordingly to the results of the comparison. This reference voltage is provided by an on-chip bandgap reference, eliminating any need for external external reference voltage.

The MAX9203ESA has many advantages that make it a valuable device. It has a low-power operation and it is able to switch between two logic levels at different output voltages, reducing the need for converters that can translate those logic levels. It also has a wide common-mode voltage range, making it suitable for use in noisy environments. Furthermore, it is able to tolerate up to 50mV of offset voltage, eliminating the need for precision voltage sources. Finally, it is protected against latch-up, making it suitable for digital circuitry as well as analog circuitry applications.

It can be applied in many applications. It can be used as an overvoltage/undervoltage detector, a comparator in pulse-width modulation (PWM) systems, a frequency discriminator, a phase detector, and as a polarity indicator. It can also be used as a switch in logic level overlaps and as an oscillator or a reference generator. Due to its low input current requirements, it can also be used as an active sample-and-hold circuit.

The MAX9203ESA is a versatile, single-supply comparator with a wide, common-mode voltage range and low-power requirements. Its typical response times and tolerance to offset make it an ideal choice for many applications. In addition, it can be used in noisy environments and it is protected against latch-up, making it a valuable component for many design needs.

The specific data is subject to PDF, and the above content is for reference