MAX921CSA+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX921CSA+T is a linear comparator designed to sense analog input signals for voltage or current monitoring applications. The device can be used to compare two linear inputs, or to detect the presence of a single input signal. When an input voltage or current exceeds a preset voltage or current limit, the comparator output goes high, indicating that the monitored voltage has exceeded the preset limit.

The MAX921CSA+T offers a wide range of operational capabilities, including:

• Active low output.
• High input impedance level, up to 1.6Kohms.
• Analog input signals range from zero to 5V.
• Expandable input sensitivity range.
• TTL compatible logic output.
• Low input current range.
• Input bias current adjustment range.

The MAX921CSA+T is designed for a range of applications, including:

• Portable medical devices.
• Battery monitoring.
• Temperature sensors.
• Industrial/environmental monitoring.
• Sensor and transducer signal conditioning.
• Test equipment.

The MAX921CSA+T consists of a linear comparator, a TTL output buffer, and an input bias adjuster. The comparator works in the following way: when the voltage on the +IN terminal exceeds the voltage on the –IN terminal by some predetermined amount, usually set by the user via an external resistor, the output will go high. The input bias adjuster can be used to adjust the voltage at which the comparator responds, thus allowing the user to adjust the sensitivity of the MAX921CSA+T.

The output of the MAX921CSA+T can be either open drain or, for higher current applications, can be buffered by a TTL output buffer. The buffer can be used to drive devices such as LEDs or buzzers to signal the presence of a voltage or current that exceeds the preset limit. In most cases, the TTL buffer will be connected to a microcontroller, so that the comparator signal can be used to trigger an interrupt or control some other device.

In addition, the MAX921CSA+T has an option to use an external capacitor to increase the hysteresis of the comparator. This can be used to prevent false trips, i.e. where the comparator output goes high but the input voltage or current has not exceeded the preset limit.

The MAX921CSA+T is a versatile linear comparator. It is useful for detecting voltage or current levels that exceed a predetermined limit, such as in battery monitoring and temperature sensors.

The device offers adjustable sensitivity, active low output, and TTL compatible logic levels, making it both reliable and flexible for a variety of applications. The external capacitor option allows for improved hysteresis to prevent false trips.

The specific data is subject to PDF, and the above content is for reference