MAX965EUA+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX965EUA+T is a high-performance and reliable linear-comparator from Maxim Integrated. It is a specialized linear-comparator that is especially well-suited for applications where a wide input common-mode range, low offset, and low drift are required. This device features a wider than normal common-mode voltage range of -3.2 V to +23.5 V, allowing it to meet the demanding requirements of automotive systems and other industrial applications. The MAX965EUA+T also features a wide input voltage range of -0.3 V to +30 V, which allows it to accommodate a wide variety of input signal levels.

The advantages of the MAX965EUA+T linear comparator lie in its low offset and drift, combined with a large input common-mode voltage range, which makes it ideal for automotive applications as well as automotive failure detection, load monitoring, and similar other applications.

The working principle of MAX965EUA+T comparator is simple – it has two inputs – the positive (non-inverting) input and the negative (inverting) input. These inputs can be connected to a variety of input signals such as digital switches, analog signals, etc. When the positive input voltage is higher than the negative input voltage, the output will be high; otherwise, it will be low. The output voltage is dependent on the input voltage range, as well as the supply voltage. The output voltage is in the range of 0 V to +VCC. The MAX965EUA+T is an open-drain device, which means that it will not sink (pull-down) the output voltage on its own – instead, it relies on an external pull-up resistor to pull the output voltage to the supply voltage VCC.

The MAX965EUA+T is a high-speed, low-power comparator, capable of switching at up to 200kHz with a typical supply current of less than 10 μA, making it ideal for applications that need fast response times, but consume little power. It is also designed for high-voltage applications, with a maximum input voltage of up to 40V and a maximum operating temperature of 105°C.

The MAX965EUA+T is an ideal choice for applications that require wide common mode input range, low offset and low drift and low power consumption. Its wide common-mode voltage range and low offset voltage allow it to be used in a broad range of industrial and automotive applications. In automotive applications, it can be used for detecting failures, measuring current, and monitoring voltage in order to protect components from damage due to over-current or over-voltage conditions.

In addition to its use in automotive applications, the MAX965EUA+T is well-suited for industrial applications, such as current sensing and current limiting. In these applications, its wide input common-mode voltage range allows it to measure the current in an environment with wide tolerance of the common-mode voltage. It can also be used to monitor high voltage conditions, such as in power supplies and motor control circuits, and to limit the current flow in battery-powered devices.

Finally, the MAX965EUA+T also has utility in audio and data acquisition applications. Its high-speed switching and low-power consumption make it ideal for audio signal-processing applications, where low-latency and low-power consumption are essential. In data acquisition systems, its wide common-mode voltage range and low-offset voltage make it excellent for measuring signals in noisy environments.

In conclusion, the MAX965EUA+T is a reliable and highly-capable linear comparator, capable of meeting the demanding requirements of automotive and industrial applications. Its low offset and drift, combined with a wide common-mode voltage range make it well-suited for applications that need responsive, low-power solutions.

The specific data is subject to PDF, and the above content is for reference