MAX989ESA+

Current - Input Bias (Max):	1pA @ 5.5V
Base Part Number:	MAX989
Supplier Device Package:	8-SOIC
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 85°C
Hysteresis:	±3mV
Propagation Delay (Max):	450ns
CMRR, PSRR (Typ):	80dB CMRR, 80dB PSRR
Current - Quiescent (Max):	24µA
Current - Output (Typ):	--
Series:	--
Voltage - Input Offset (Max):	5mV @ 5.5V
Voltage - Supply, Single/Dual (±):	2.5 V ~ 5.5 V, ±1.25 V ~ 2.75 V
Output Type:	CMOS, Push-Pull, Rail-to-Rail, TTL
Number of Elements:	2
Type:	General Purpose
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
The MAX989ESA+ is a high-output linear amplifier designed to operate in a variety of applications. The device is a highly optimized, versatile amplifier that has been designed to provide superior performance in a wide range of applications. The MAX989ESA+ amplifier is a single-ended, linear amplifier that can operate in a wide range of applications. It is a full-bore single-channel amplifier with a maximum supply voltage of 5 volts. The device can be used to drive low-impedance loads such as speakers and headphones. The amplifier is capable of delivering up to 250mW into a 16 ohm load at 5 volts. The amplifier is also capable of delivering an output voltage swing of up to 18 volts. The amplifier is also capable of providing a high slew rate of up to 1V/µs.

Application Fields
The MAX989ESA+ amplifier has been designed to provide superior performance in a wide range of applications. The amplifier is commonly used in consumer electronics such as audio systems, home theatre systems and portable music devices. The amplifier is also commonly used in automotive applications. The amplifier is also used in professional audio systems and broadcast applications. The amplifier is also commonly used in medical devices, instrumentation, and in various industrial applications.

Working Principle
The MAX989ESA+ amplifier is a linear amplifier which means that it amplifies an incoming signal (which is usually an audio signal) directly without any distortion or additional noise. The amplifier operates by taking an incoming signal, such as an audio signal, and amplifying it to a higher level without distortion. The amplifier is able to do this as it operates as a direct, linear amplifier. This means that the amplifier does not add any additional distortion or noise to the signal, instead it just amplifies it in a linear fashion.

The amplifier is also capable of providing a wide range of output voltages. This is due to the amplifier’s high output impedance. The amplifier has an output impedance of less than 1 ohm, which allows it to provide a wide range of output voltages without affecting the quality of the signal. The MAX989ESA+ amplifier is also capable of delivering an output voltage swing of up to 18 volts. This is due to the device’s high supply voltage of 5 volts. This allows the amplifier to deliver a wide range of output voltages without affecting the quality of the signal.

The MAX989ESA+ amplifier is also capable of providing a high slew rate of up to 1V/µs. This allows the amplifier to provide a high level of resolution when amplifying signals. The device can also provide a wide range of output frequencies, due to its low frequency response of 28 Hz to 50 kHz. This allows the amplifier to amplify a wide variety of signals while still maintaining a high degree of accuracy and fidelity.

The amplifier also features a high output power handling capability of up to 250 mW into 16 ohm loads. This enables the amplifier to be used in a wide range of applications. The amplifier is also capable of delivering a high power output while still maintaining a high degree of accuracy and fidelity.

Conclusion
MAX989ESA+ is a single-ended, linear amplifier designed for a wide range of applications. It is capable of delivering up to 250mW into a 16 ohm load at 5 volts and can provide a wide range of output voltages without affecting the quality of the signal. It also provides a high slew rate of up to 1V/µs and has a low-frequency response of 28Hz-50kHz. The amplifier also features a high output power handling capability of up to 250mW into 16 ohm loads. It is commonly used in consumer electronics such as audio systems, home theatre systems, portable music devices, and automotive applications. The device is also used in professional audio systems, broadcast applications, medical devices, instruments, and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description