MAX991EUA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX991EUA+ are high-side current-sense amplifiers designed to provide accurate voltage output proportional to a sensing element in the high-side current path of a system. These current amplifiers integrate all necessary components for a self-contained comparator, such as an operating supply, a reference voltage, an offset voltage, and an input comparator.

The MAX991EUA+ can be used for applications requiring measurement of high-side current, such as in switch-mode power supplies, motor control, and batteries. This is done by providing an output that is proportional to the sensed current, allowing non-invasive measurements of high-side currents with maximum accuracy. A special benefit of the MAX991EUA+ is that they contain an integrated high-side switch to completely isolate the sensing element from the rest of the system.

The MAX991EUA+ current sense amplifiers belong to the linear-comparators category. A comparator is a device that uses two input signals and compares them to determine if one is greater than, less than, or equal to the other. In the case of the MAX991EUA+, both its inputs are linear signals. It compares the two signals, and if one is greater than the other, it outputs a voltage. This voltage is proportional to the difference between the two signals, allowing for non-invasive measurement of high-side currents.

The working principle of the MAX991EUA+ is simple. Its two inputs are a voltage reference and a voltage offset from the sensing element. The reference voltage is an internal signal that has been pre-programmed to a specific value (typically between 0.5V and 3V) for accuracy purposes. The offset voltage is the voltage sensed from the high-side current path of the system. The MAX991EUA+ measures the difference between the two inputs, and if the offset voltage is greater than the reference voltage, it will output a signal that is proportional to the difference between the two.

The output signal of the MAX991EUA+ can be used in various ways, such as controlling a relay to disconnect a load in case of overcurrent or overvoltage, or building a feedback loop to constantly monitor the current flow in a system. It can also be used in conjunction with a microcontroller to measure the current in a network and provide a current readout on a display.

In summary, the MAX991EUA+ is a linear-comparator designed for applications that require measurement of high-side current. It has two inputs, a reference voltage and an offset voltage, and provides a voltage output that is proportional to the difference between the two. The MAX991EUA+ is a self-contained comparator and contains an integrated high-side switch to completely isolate the sensing element from the rest of the system. It can be used in various ways, such as in switch-mode power supplies, motor control, and batteries.

The specific data is subject to PDF, and the above content is for reference