MAX995ESD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear comparators are electrical devices used to make comparisons between two analog inputs and conduct digital processing on the results of the comparison. The MAX995ESD is a high precision comparator from Maxim Integrated that is designed for low power applications with a quiescent supply current of only 5 μA.

The MAX995ESD has a typical offset voltage of only 100 μV and a typical wide common mode range of up to ±15 V. It is suited for applications such as battery powered systems and portable electronics.

The MAX995ESD is used in a wide range of applications including voltage sequencing, zero crossing detection, power/energy monitoring, medical instrumentation, snap-action control, alerts, alarms, fault detection and over-temperature protection.

The MAX995ESD operates on dual power supplies of between +2.5 and +36 V, with an optional 62 dB supply rejection ratio over the common-mode range. It also features a maximum propagation delay of 8 ns for quick response times.

The MAX995ESD comparator is designed for low power applications and its low quiescent current helps reduce overall power consumption. It also has an open-drain output and is equipped with an active pull-up device so that it can remain active even when the supply current is low. The comparator can be used to operate in either normal or positive feedback mode.

The MAX995ESD comparator is designed to operate with an input common-mode voltage range of up to 30 V, allowing it to be used in applications that involve higher voltages. It also features advanced EMI protection and transient protection, protecting the device from external interference.

The MAX995ESD comparator works by comparing an input voltage to a reference voltage, and then outputting either a low or high logic state, depending on which voltage is higher. If the input voltage is greater than the reference voltage, the output will be high. If the voltage is lower than the reference, the output will be low.

For proper operation of the MAX995ESD, the voltage difference between the positive and negative terminals must be greater than the comparator’s maximum input offset voltage. Moreover, the supply voltage should be within the specified range. The operating supply voltage for the MAX995ESD is between +2.5 and +36 V.

The MAX995ESD comparator is an excellent low power device that is suitable for a wide range of applications. It offers high accuracy with low power consumption, and its design and features make it an ideal choice for many applications. It is an ideal choice for applications requiring precise comparison between voltages in a low power environment.

The specific data is subject to PDF, and the above content is for reference