MB89538APMC-G-702-JNE1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MB89538APMC-G-702-JNE1 device refers to a microcontroller unit (MCU), part of a family of microprocessors that integrate various types of digital components, such as counters, timers, shift registers and I/O ports. This particular microcontroller belongs to the NXP Semiconductors’ 8/16-bit embedded controller product family.

The MB89538APMC-G-702-JNE1 device is an 8-bit microcontroller and combines the features of low complexity and cost while providing high performance. It is well suited for a wide range of embedded applications, such as in household appliances, industrial motors, and automotive systems. In automotive applications, the device can be used for throttle control, braking systems, transmission control, and engine management.

The MB89538APMC-G-702-JNE1 device is equipped with several physical resources that provide powerful performance for its targeted applications. It is based on a CMOS (complementary metal oxide semiconductor) process, and contains various methods of variable speed control, event/action programming, and analog communication interface. The on-chip memory consists of ROM, flash ROM, RAM, and EEPROM, offering various capabilities for efficient data processing. It also has an extended temperature range for a variety of applications.

The MB89538APMC-G-702-JNE1 device operates at a maximum frequency of 10 MHz and features multiple clock sources: low-power low-speed and high-speed frequency modes. It provides a 48/16-bit timer, two 16-bit PWM modules, and one 8-bit Timer/Counter. The device is also capable of controlling up to sixteen external interrupt sources.

The MB89538APMC-G-702-JNE1 device features two types of serial communication interfaces. One is an asynchronous serial channel - UART (Universal Asynchronous Receiver/Transmitter), which supports four types of data lengths, four types of baud rates, even/odd parity check and multiple types of interrupts. The other is a synchronous serial channel - SPI (Serial Peripheral Interface), which supports up to four devices, variable clock rate, four data frame lengths, variable TX/RX clock polarities, variable chip select polarity, half/full duplex mode, and slave/master mode.

The MB89538APMC-G-702-JNE1 device is commonly used in embedded systems for a variety of applications. It is used in motor speed and position control, automotive body systems, automotive actuators, temperature control and management in heating, ventilation and air-conditioning, industrial motors, lighting control, security systems and consumer products.

The MB89538APMC-G-702-JNE1 device works on the principle of executing a set of code, which is stored in its memory, in response to a set of input signals received from the external environment. It uses a combination of hardware and software, along with on-chip peripheral resources, to execute the code and to interface with the external environment. The device is capable of executing multiple tasks, effectively managing the resources and enabling deterministic, real-time control.

The MB89538APMC-G-702-JNE1 device is an 8-bit microcontroller designed for a wide range of embedded applications. It has an extended temperature range, multiple clock sources, a variety of embedded peripherals, and the ability to execute multiple tasks, for efficient data processing and powerful performance.

The specific data is subject to PDF, and the above content is for reference