MB90587CAPF-GS-170E1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MB90587CAPF-GS-170E1 is an embedded microcontroller specifically designed for digital control applications. It features on-chip memory and powerful support logic, making it ideal for applications ranging from industrial and automotive to home, office and communications systems. This article explores the application field and working principle of the MB90587CAPF-GS-170E1.

The MB90587CAPF-GS-170E1 is a high performance microcontroller designed for a wide range of applications that require digital control. It is based on the 8-bit M39047 series core and features an extended instruction set that includes a fast multiplier/accumulator, an interrupt controller and a debugger. Its internal architecture consists of four independent buses, each with unique and specific capabilities. The SSP bus supplies instructions and data to the CPU and has a peak transfer rate of 2 MB/s. The X256 bus is used for memory accesses and can run at up to 33 MHz. The I/O bus is optimized for digital control applications and supports up to 17 signals. Finally, the Snooper bus handles communications between the CPU, other devices and external peripherals.

The MB90587CAPF-GS-170E1 also includes on-chip memory with 10KB of RAM and 64KB of Flash. The Flash memory can store up to four different programs, allowing the device to be programmed once and then used for a variety of applications. The on-chip memory is also designed for reliable operation and can be erased, programmed and verified in seconds. In addition, the device features an additional 16KB of internal memory, divided into four pages which can be used to store variables and program constants.

The MB90587CAPF-GS-170E1 also supports powerful support logic for both software and hardware development. It includes a 32-bit general purpose timer, an 8/16-bit pulse-width modulation (PWM) unit, two 16/32-bit timers and two input/output (I/O) ports. The device also provides an on-chip diagnostic program, which enables the user to access low-level registers and memory locations. The support logic also includes an extended debug monitor and in-circuit emulator, which allows the user to debug code without having to remove the device from the application.

The working principle of the MB90587CAPF-GS-170E1 is based on its microcontroller architecture and on-chip support logic. First, the processor runs the instructions contained in its Flash memory. The instruction set consists of high-level language extensions, which allow the device to interpret a variety of instructions, such as arithmetic operations, logical operations, memory accesses and subroutines. The microcontroller also supports powerful debugging features, such as the ability to set breakpoints and step through instructions. In order to control external devices, the device includes support logic such as the PWM unit and I/O ports. The PWM port allows the user to control the speed of a motor or other similar device, while the I/O ports allow the user to interface with other peripheral devices.

In short, the MB90587CAPF-GS-170E1 is an embedded microcontroller designed for digital control applications. It features on-chip memory and powerful support logic, as well as an instruction set that allows it to interpret a variety of instructions. Additionally, its support logic includes a general purpose timer, a PWM unit, two timers and two I/O ports. This allows the user to control external devices and program the device for a variety of applications. Finally, the device’s debugging features make it easier to debug code and use the device for development.

The specific data is subject to PDF, and the above content is for reference