MB90867ESPMC-G-370E1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MB90867ESPMC-G-370E1 is a microcontroller designed for embedded applications. It is a 32-bit system-on-chip (SoC) that integrates a dedicated microcontroller, a memory controller and several general purpose I/O modules. The microcontroller can be programmed using a variety of languages, including assembly code, C and C++. The microcontroller has a number of unique features that make it a good choice for embedded applications.

The MB90867ESPMC-G-370E1 features a single-cycle instruction execution with an instruction cache and an interrupt latency of two clocks. It has a 16-bit wide internal data bus and a 24-bit wide address bus with up to 256K bytes of externally accessible memory. The microcontroller also features several configurable input/output ports, serial communication interfaces, a digital signal processor, an 8-bit A/D converter, a 3-channel O/P converter and a 12-bit PWM module to name a few.

The MB90867ESPMC-G-370E1 is suitable for a wide range of embedded applications, such as automation, data acquisition, measurement and control. The combination of a flexible instruction set, a wide range of integrated I/O, and a compact size make it an attractive solution for applications requiring small size and low power consumption.

The basic working principle of aMB90867ESPMC-G-370E1 is to execute instructions based on a stored program. These stored instructions are written in an assembly code or high-level languages such as C or C++. The processor interprets these instructions and, depending on the instruction, performs specific operations such as accessing and manipulating data, making decisions and executing commands.

For example, a instruction may require the processor to transfer data from memory to memory, while another may require the processor to perform a mathematical operation such as multiplication or division. After executing an instruction, the processor will look up the next instruction in the program. The processor will then jump to the address of the next instruction and repeat the cycle.

Once the program has been executed, the microcontroller can be put into a low-power standby state, where it consumes very little power, for example, when a program has been completed and the system is not actively doing any calculations or controlling any peripherals.

In conclusion, the MB90867ESPMC-G-370E1 is an excellent choice for embedded applications that require low power and small size. The combination of a flexible instruction set, a wide range of integrated I/O, and a compact size make it an attractive solution for embedded applications.

The specific data is subject to PDF, and the above content is for reference