MB90F020CPMT-GS-9167E1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Embedded systems are electronic systems that are designed to carry out tasks on their own, without the need for a user\'s intervention. Microcontrollers are the most commonly used type of embedded system and are used in a wide variety of applications, from home automation to industrial robots. The MB90F020CPMT-GS-9167E1 is an example of a microcontroller from the Mitsubishi Electronics family. This article will give an overview of the MB90F020CPMT-GS-9167E1\'s application field and working principle.

Application Field

The MB90F020CPMT-GS-9167E1 belongs to Mitsubishi Electronics\' MB902xx series of microcontrollers. This series is a low-cost line of 16-bit microcontrollers with a wide variety of features and functions. The MB90F020CPMT-GS-9167E1 is mainly used in automotive, industrial and consumer applications. It is well-suited for applications that require low power consumption, such as automotive engine control modules, home automation systems and security systems.

The MB90F020CPMT-GS-9167E1 has an 8-bit central processing unit (CPU), a 16-bit time processing unit (TPU) and an 8-bit communication interface (CI). The CPU is designed to perform basic arithmetic and logic operations with a maximum clock frequency of 20 MHz. The TPU is designed to perform signal capture and signal processing with a maximum clock frequency of 40 MHz. The CI is designed to perform serial communication with a maximum data rate of 250 Kbps.

The MB90F020CPMT-GS-9167E1 also features an on-chip Crystal Oscillator, a watchdog timer, two pulse-width modulation (PWM) channels, a serial peripheral interface (SPI) and two analog-to-digital converters (ADCs). The Crystal Oscillator allows the microcontroller to generate a clock signal with high accuracy and stability. The watchdog timer helps the microcontroller to remain operational even in the event of a system error. The PWM channels allow the microcontroller to generate pulse-width modulated signals for controlling motors, solenoids and other devices. The SPI and ADCs allow the microcontroller to interface with other devices such as sensors and actuators.

The MB90F020CPMT-GS-9167E1 also features a wide variety of memory configurations, including Flash memory, RAM and EEPROM. The Flash memory can store up to 128 KB of program code, while the RAM can store up to 8 KB of data. The EEPROM can store up to 32 KB of configuration data.

Working Principle

The MB90F020CPMT-GS-9167E1 microcontroller uses a Harvard-style architecture, which allows the processor to access both program and data memory simultaneously. This allows the processor to quickly access instructions from memory, accelerating program execution time. The microcontroller uses a Von Neumann architecture, which allows for the sharing of address, data and control signals between the processor and memory.

The MB90F020CPMT-GS-9167E1 has four distinct modes of operation; normal mode, standby mode, sleep mode and deep sleep mode. The normal mode is the default mode of operation when the microcontroller is powered on. In this mode, the CPU is in active mode and is executing instructions from memory. The standby mode is entered when the microcontroller is reset. In this mode, the CPU is powered down and the RAM and other peripherals are powered off. The sleep and deep sleep modes are used to reduce power consumption while the microcontroller is inactive. In the sleep mode, the CPU is powered down and the RAM and other peripherals are powered on. In the deep sleep mode, the CPU and all peripherals are powered down and the microcontroller\'s power consumption is reduced to the minimum.

The MB90F020CPMT-GS-9167E1 also features an interrupt controller which is responsible for managing the external and internal interrupts. The external interrupts are triggered by external devices such as switches or sensors, while the internal interrupts are triggered by the on-chip peripherals such as timers and ADCs. The interrupt controller is responsible for detecting the interrupts and directing the interrupt to the appropriate interrupt handler to perform the required task.

The MB90F020CPMT-GS-9167E1 also features an inverse assembler for the assembly of programs. The inverse assembler processes the assembly language program and generates the necessary binary code in the form of micro-operations. These micro-operations are then sent to the CPU, where they are interpreted and executed.

The MB90F020CPMT-GS-9167E1 also features a wide variety of input/output (I/O) ports. These ports can be configured to interface with external devices such as sensors and actuators. The I/O ports can be configured to transmit and receive data, as well as to control the timers, ADCs and external interrupts.

In conclusion, the MB90F020CPMT-GS-9167E1 is an example of a low-cost, low-power microcontroller from the Mitsubishi Electronics family. It is well-suited for automotive, industrial and consumer applications that require low power consumption. The microcontroller features an 8-bit CPU, 16-bit TPU, 8-bit CI, on-chip Crystal Oscillator, watchdog timer, two PWM channels, SPI and two ADCs, as well as a wide variety of memory configurations. Additionally, it features an Harvard-style architecture, a Von Neumann architecture and an inverse assembler, as well as a wide variety of I/O ports. This makes the MB90F020CPMT-GS-9167E1 a powerful and versatile microcontroller, capable of meeting the needs of a wide range of applications.

The specific data is subject to PDF, and the above content is for reference