MB96F386RSCPMC-GS-131E2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

   The MB96F386RSCPMC-GS-131E2 microcontroller is a high-end internal-peripheral mixed-signal controller used in embedded system applications. It combines powerful volatile memory, CPU core, and integrated peripheral functionality into a single IC, providing high performance and cost-effective solutions for embedded systems designers.

   The primary application field of the MB96F386RSCPMC-GS-131E2 is in embedded control systems. It is used in applications such as home automation, industrial control, vehicle telematics, medical systems, consumer electronics, and similar products. It can be used as a standalone microcontroller—providing complete control of a particular embedded system—or it can be combined with other microcontrollers and other peripherals to extend the capabilities of those systems.

   The MB96F386RSCPMC-GS-131E2 is an 8-bit microcontroller with a 32-bit wide data bus that can support up to 4 external slave peripherals. It provides an integrated programmable logic device (PLD) to support external logic functions, and also includes an 8-channel ADC and an internal voltage sense circuit for monitoring and control. Additionally, the MB96F386RSCPMC-GS-131E2 includes an internal oscillator, 16 general purpose I/O (GPIO) lines, a UART and I2C interface, and a 4-channel timer/counter.

   The MB96F386RSCPMC-GS-131E2 features a 256K byte programmable internal flash memory that can store up to 128K words of code and 64K words of data. The available memory is further extended via external bus interfaces such as SDRAM, SRAM and ROM. Additionally, the MB96F386RSCPMC-GS-131E2 provides a host of other features that enable rapid development and prototyping of embedded system applications.

   The workings of a microcontroller such as the MB96F386RSCPMC-GS-131E2 rely mainly on the internal program that is programmed into the memory and the I/O control of the external peripherals. The internal program is executed by the CPU and is responsible for controlling the internal data flow, the external peripheral control and the overall functioning of the microcontroller. When the microcontroller is powered on, the first step is the initialization process, where the internal registers, the external peripherals and the GPIO lines are all configured for the proper operation of the microcontroller. After this, the main program is executed and the microcontroller enters a loop where the CPU executes instructions depending on certain conditions and input signals.

   The I/O control pins are used to monitor the external peripheral devices and send commands to them, while the GPIO lines are used to control the logic states of the external devices. The internal program carries out the operations that involve reading of data from the peripheral devices and processing them in order to carry out the desired functions. Depending on the type of the peripheral device, there are specific commands that are sent to it, in order to control it. The data gathered from the external peripherals is also processed by the CPU, based on the programmed logics.

   The MB96F386RSCPMC-GS-131E2 is a powerful and cost-effective microcontroller with a wide range of applications in embedded control systems. Its high performance and ample memory capacity allow it to be used to develop sophisticated embedded systems, with ease. Its wide range of integrated peripherals provide a great degree of flexibility in controlling devices and systems, making it a very popular choice for embedded applications.

The specific data is subject to PDF, and the above content is for reference