MBA02040D1422BC100

Series:	MBA/SMA 0204 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	14.2 kOhms
Tolerance:	±0.1%
Power (Watts):	0.4W
Composition:	Thin Film
Features:	Automotive AEC-Q200
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.063" Dia x 0.142" L (1.60mm x 3.60mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are a type of electronic component that can be used to resist current and maintain a constant voltage or current level in many electrical systems. The most common types of through hole resistor packages are axial and radial. The MBA02040D1422BC100 is a through-hole resistor and is part of a family of resistors made by Vishay. It has a resistance of 0.11 to 0.14 Ohms, and a power rating of 0.14 to 0.2 Watts. It can operate at temperatures ranging from -20°C to +125°C, and has a tolerance rating of 1%. The MBA02040D1422BC100 is typically used in consumer electronics and other low-voltage applications. It is often used in circuits which require a precise level of current flow or voltage drop. It is particularly useful in applications where high power needs to be avoided due to space constraints, such as in automotive and other small devices. Its low temperature coefficient allows it to perform optimally over a wide temperature range, whereas traditional resistors may have performance issues in extreme temperatures.The principle behind the MBA02040D1422BC100 is simple. The resistor works on the principle of Ohm’s Law, which states that the current through a conductor between two points is directly proportional to the potential difference across the two or equal to the ratio of the resistance between them. The MBA02040D1422BC100 consists of two metal plates on each side of a dielectric material, which is filled with a conductive material. The conductive material, which is typically made of a metal or graphite, creates the resistance needed to provide the desired current or voltage level.The MBA02040D1422BC100 can be used in a wide variety of applications. It is often used in power supply designs to control current and voltage, acting as an important feedback element in over-voltage, over-current, and short-circuit protection circuits. It is also used in small motor controls, digital logic circuitry, human machine interfaces, sensors, and other such applications. Given its wide range of operating temperatures and tolerances, it is ideal for use in precision instruments and laboratory equipment.The MBA02040D1422BC100 can be mounted with screws, soldered, or through an insulation displacement or pin connection (IDC). It is available in a variety of physical shapes and can be customized for specific needs. It is also relatively easy to install given its axial or radial design, and is highly reliable over a long period of time. It is also very affordable, making it a viable choice in many applications. In summary, the MBA02040D1422BC100 is a through-hole resistor that is ideal for low-voltage applications such as consumer electronics and automotive systems. It works on the principle of Ohm’s Law, and is constructed with two metal plates filled with a conductive material which acts as the resistor. It is highly reliable and affordable, and is available in different physical shapes to meet the specific needs of the application. Its ability to perform well over a wide temperature range makes it an ideal choice in precision instruments and laboratory equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description