MBR10100-E3/4W

Series:	TMBS®
Packaging:	Tube
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io):	10A
Voltage - Forward (Vf) (Max) @ If:	800mV @ 10A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	100µA @ 100V
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	TO-220-2
Supplier Device Package:	TO-220AC
Operating Temperature - Junction:	-65°C ~ 150°C
Base Part Number:	MBR10100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MBR10100-E3/4W Application Field and Working PrincipleOverview of MBR10100-E3/4WThe MBR10100-E3/4W is a type of general-purpose, single-phase rectifier diode, commonly used for power supply and signal rectification. It has a bridge configuration and offers a series of voltages, such as 400V up to 1kV. This rectifier diode is applicable for medium frequency, high speed switching applications and has a non-zero recovery time.ApplicationsRectifier diodes are semiconductor components that are used to convert alternating current into direct current. The MBR10100-E3/4W rectifier diode is typically used for AC-DC power conversion, including motor control, signal rectification and power supply applications.It is also predominantly used in applications such as inverters, power supplies, motor drives and solar panel rectification, as well as theater and audio system applications, including tube amplifiers, analog recording and mixing consoles. This diode also has wide usage in industries such as automotive, consumer electronics and communications. Working Principle of MBR10100-E3/4W The MBR10100-E3/4W has a bridge configuration and is a type of single-phase rectifier diode. It works by allowing current to pass through it when it is forward biased. When the diode is reversed biased, current cannot pass through it, thus switching the diode off. The MBR10100-E3/4W works by providing a voltage drop for the current as it passes through the diode in forward bias. The amount of current that can pass through the diode depends on the voltage drop and the voltage at which it is rated to operate.The MBR10100-E3/4W has a non-zero recovery time. This means that once the diode reaches its reverse bias voltage, there is a slight delay before current begins to pass through the diode again. This is important for applications such as motor drives, as it ensures that the motor is protected against voltage surges.ConclusionThe MBR10100-E3/4W is a single-phase rectifier diode that is used in a variety of applications, such as AC-DC conversion, motor control, signal rectification and power supply applications. It allows current to pass through it when it is forward biased, and prevents current from passing through it when it is reverse biased. The MBR10100-E3/4W also has a non-zero recovery time, ensuring that voltage surges are prevented against in motor drive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description