MBR2060CTF-E1

Diodes - Rectifiers - Arrays

The MBR2060CTF-E1 is a high voltage rectifying diode array, consisting of two integrated and isolated devices each with ten high voltage recitifying diodes. The device can be used in a wide range of applications, from rectifying and filtering high voltage AC into DC, to forward and reverse overvoltage protection, and from buffering to voltage switching applications, and is especially suited for high voltage LED lighting.

Applications of MBR2060CTF-E1

MBR2060CTF-E1 can be used in DC/DC converter circuit and other high voltage applications where an isolation barrier is necessary. The dual device configuration means that both halves can be used as individual rectifiers, or can be connected in series, parallel, or paralle-in-series configuration to increase current density while still maintaining isolation.

The MBR2060CTF-E1 can be used to provide isolation when connecting separate DC-DC converters, and can also be used in switch mode power supplies, AC-DC rectification, motor drive circuits, lighting, and HVAC systems.

In addition, the device can be used to bridge two high-voltage power sources, such as two batteries, allowing the use of a single DC power connection for high power applications.

Working Principle of MBR2060CTF-E1

The MBR2060CTF-E1 works by allowing the current to flow through the device in one direction and blocking it in the other. The 10 diodes in the device each have an anode (the cathode of the diode) and a cathode (the anode of the diode). The diodes have a breakdown voltage rating of 500V and a maximum current rating of 2A.

When a positive voltage is applied to the anode and a negative voltage to the cathode, the diodes are forward biased and the current will flow through the device. When a negative voltage is applied to the anode and a positive voltage to the cathode, the diodes are reverse biased, and no current will flow through the device.

The MBR2060CTF-E1 can also be used in flyback transformer applications, where the diodes provide isolation and also protect against over voltage spikes. In this application, the diodes are switched off for the charge cycle and then on during the flyback cycle to protect the circuit from high voltages.

Conclusion

MBR2060CTF-E1 is a versatile rectifying diode array specifically designed for high voltage applications. It can be used for a variety of applications, from protecting against overvoltages and providing isolation to providing power for high power applications. It is a valuable tool for any circuit designer in need of a reliable and cost effective way to add protection and isolation to a power circuit.