MC100ELT20DTR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Translators, Level Shifters is an important category of electronic components used in modern electronic engineering. The MC100ELT20DTR2 is a new device that fits perfectly into this category.

The MC100ELT20DTR2 is a dual fast, low power differential bus transceiver suitable for low voltage (3.3V) applications. It features a high-speed data communication rate of up to 1.25Gbps and ult-low static power dissipation across the entire VCC range. The device supports LVDS, LVPECL and LVHSTL signaling standards and its inputs and outputs are TTL compatible.

The MC100ELT20DTR2 is ideal for almost any industry-standard differential interfaces, including those used in high speed digital I/O devices, telecom platforms, chip-to-chip communications, LANs, and other similar applications. Its ESD performance is superb, with a rating of 8 kV (HBM) on all pins.

In terms of working principle, the MC100ELT20DTR2 uses a differential signal transmitter that takes a single-ended high-speed data signal and converts it into a differential signal. The differential signal is sent over a twisted pair of wires and arrives at the receiver, where the two signals are converted back into a single-ended signal. This process allows signals to travel farther with less noise than is possible with a single-ended connection.

The MC100ELT20DTR2 also features adaptive equalization, an equalization technique that allows it to pre-equalize the incoming data stream and thus reduce the effects of intersymbol interference. This technique allows it to achieve higher data rates over long cables with minimal signal degradation.

In addition, the device is equipped with input thresholds that allow it to take a wide range of different signal levels and present them as TTL compatible logic levels. This greatly simplifies the interface between LVDS and other low voltage devices and the rest of the system.

The MC100ELT20DTR2 is also protected against ESD and latch-up, which means it can reliably handle electrostatic discharges and sudden power surges without suffering permanent damage. Additionally, it features programmable output impedance and adjustable gain to facilitate better signal integrity and power distribution.

With its low-power operation, high-speed data communication rate, and advanced features, the MC100ELT20DTR2 is a perfect, low-cost solution for differential signal transmission. Its performance, versatility, and reliability make it a great choice for any type of low-voltage differential interface.

The specific data is subject to PDF, and the above content is for reference