MC10EP016FAR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC10EP/100EP/FC10EP logic integrated circuits are manufactured by ON Semiconductor. They belong to the logic - counters, dividers category. The MC10EP016FAR2 is a 16-bit programmable counter IC.

It is made from CMOS technology and operates from a single 3.3-volt power supply. It has a high-speed phase-locked loop (PLL) and phase comparator for frequency division and phase adjustment.

The MC10EP016FAR2 also connects to an external R/C oscillator with a 0.007-volt (0.7%) reference output. The PLL can also be connected to an external clock thanks to an on-chip voltage-controlled oscillator (VCO). The device also comes with a synchronous reset that can be used to reset the PLL.

The MC10EP016FAR2 is widely used in the automotive, communications, and consumer electronics markets. It is commonly used in frequency synthesizers and oscillators, such as radio receivers and transceivers, mobile phones, and GPS systems. It is often used in applications requiring low-noise mode such as communication systems.

In terms of its working principle, the MC10EP016FAR2 divides an input frequency, typically a reference clock frequency, into fractions in order to generate a high frequency clock. This is accomplished using the VCO, which is controlled by an on-chip programmable counter. The counter can be programmed to program the VCO within a range of frequencies.

The VCO, in turn, outputs a signal at the programmed frequency. By controlling the frequency of the VCO, the MC10EP016FAR2 can be used to generate signals of different frequencies. These signals can also be used to modify the phase of the reference signal, allowing the programmed frequency to be shifted by as much as 180°.

The MC10EP016FAR2 is an ideal solution for applications requiring a wide frequency range and low power consumption. Thanks to its on-chip counter and VCO, the device offers excellent versatility and cost-effectiveness. Furthermore, its low-noise and low-power design make it ideal for mobile and embedded applications.

The specific data is subject to PDF, and the above content is for reference