MC10EP35DG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC10EP35DG is a combination of a 3-state inverter and a D-type flip-flop integrated circuit. It is basically composed of a D-type flip-flop, a complementary transfer gate, and two inverters. Designed with the 0.6 micron CMOS technology, it operates from a voltage supply of 4.5V to 7.0V. This combination of logic blocks provides the capability to construct a wide variety of logic functions, from single bit data storage to signal conditioning.

The most common application field for D-Type Flip-Flops are in interface design, memory decoding, and data storage applications. In essence, the flip-flop takes an input signal and stores it, allowing the processor or another device to access it whenever necessary. The output of the flip-flop can then be accessed whenever needed. Thanks to the combination of features on the MC10EP35DG, this flip-flop is suitable for applications requiring multiple logic levels and signal conditioning.

As far as working principles are concerned, the flip-flop basically works like a switch. Upon receiving an input signal on a certain input pin, the outputs will switch accordingly or remain unaltered depending on the clock level. In each cycle, the D-flip-flop is first set with the data present at the input, the D-input. When the clock arrives at the clock input, the Q output will track the level of the D-input. The inverse of the D-input will be found at the Q output. The other output of the flip-flop, Qbar, is the inverse of Q.

The MC10EP35DG can also be configured as a 3-state inverter by configuring the OE pin, which enables output disable. Thus, when OE is inactive the flip-flop\'s outputs are in the high-impedance state, meaning the outputs are neither high nor low, allowing the outputs to be controlled by external signals. This makes it possible to use the flip-flop in bus-controlled applications and signal conditioning.

Overall, the MC10EP35DG is a useful device in a variety of applications. Combining the features of a 3-state inverter and a D-type flip-flop, this integrated circuit is suitable for common logic functions including signal conditioning, memory decoding, and data storage applications.

The specific data is subject to PDF, and the above content is for reference