MC10EP58DTR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic signal switches, multiplexers and decoders are important components of digital circuit design, and the MC10EP58DTR2 is no exception. The MC10EP58DTR2 is a 3-to-8 line decoder/multiplexer which acts as both a decoder and multiplexer, providing an easy and efficient way to switch, select and decode multiple signal sources.

The MC10EP58DTR2 operates in three modes: decode mode, multiplexer mode, and open-drain output mode. In decode mode, when the select input is asserted, the output of the device corresponds to the binary level of the selected input line. In multiplexer mode, the device can be used to turn on one of the eight outputs when a select line is asserted. Finally, in open-drain mode, the outputs are active-low, and can be used for active-low signal applications.

The MC10EP58DTR2 has a wide range of applications. In the automotive industry, it can be used in motor control, power windows, and body controllers. In the aerospace industry, it is used for navigation systems, lightening protection, and guidance systems. In consumer electronic devices, it is used in digital cameras, portable video players, cell phones, and TV tuners. Finally, in networking applications, it is used in Ethernet switches and routers, and infrastructure and access equipment.

The MC10EP58DTR2 is a CMOS logic circuitry device with input logic levels of 0.8-2 volts and an output logic level of 1.5-3.5 volts. It is capable of driving up to 10mA of output current and has a maximum propogation delay time of 15 ns. It operates at the temperature range of -55°C to 125°C and is housed in an SOIC package.

The MC10EP58DTR2 operates by decoding binary value at select inputs, which corresponds to the select output pin. The device is enabled if the enable (E) pin is active high and the inputs are verified low. The outputs remain unintialized as long as the respective inputs are both logic high or logic low. The outputs can be overridden in open-drain mode by the enable pin.

The outputs can also be configured as an open-drain type by connecting a pull-up resistor to the pin. This allows the pin to be open as long as the enable pin is asserted. Also, the outputs will remain high if the respective inputs are both high or low; however, the device will continue to consume current in open drain mode. The enable pin on the device is active low and must be low in order for the device to function.

In summary, the MC10EP58DTR2 is a three-to-eight line decoder/multiplexer which provides an easy and efficient way to switch, select and decode multiple signal sources. It is suitable for applications in automotive, aerospace, consumer electronics, and networking. It has low-voltage input and output logic levels, a maximum propogation delay time of 15 ns, and an operating temperature range of -55°C to 125°C. Lastly, the outputs can be configured to an open-drain type with the enable pin active low.

The specific data is subject to PDF, and the above content is for reference