MC10H016L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC10H016L is a high performance, low power, low voltage, CMOS 8-bit synchronous up/down counter with complementary output. It features a fast clock frequency and is able to function up to 3.75 MHz. The logic level output stages provide rail-to-rail operation between VDD and VSS. The MC10H016L also includes a modulating end count (MEC) pin that can drive the downstream logic low or high when the counter reaches the end count.

The MC10H016L has numerous applications in various electronic fields. Common usage scenarios include counting pulses, tracking the time of a device, creating frequency dividers, and other tasks involving time tracking or counting. It can also be used for frequency division (by modifying the output stage), address generation, and data transmission.

The operational principle of the MC10H016L is simple. At every rising edge of the applied clock signal, the count stored in its internal register is increased/decreased by 1 depending on the logic level of the up/down pin. The output is then determined by the internal 8-bit value which is supplemented with a logic level at the modulating end count pin. In the event of an end count (maximum or minimum) the logic level of the MEC pin is modified, setting a higher or lower logic level than the register output.

The MC10H016L also includes additional features such as a clear (CLR) pin to reset the internal counter. At specific input of the CLR, the count output is reset to either 0 or F (depending on the logic level of the UP/DOWN input pin). The MC10H016L can also be setup in a connected series (daisy-chain), allowing for cascading multiple counter together and effectively increasing the digital output stage of the counter. This allows the creation of a 16-bit counter or an even larger sized output.

In conclusion, the MC10H016L is an efficient 8-bit synchronous up/down digital counter. It is capable of handling clock frequencies up to 3.75 MHz and its output stages utilizes CMOS logic, allowing for rail-to-rail operation between VDD and VSS. It features additional features like an end count pin and an integrated clear pin, allowing the MC10H016L to be used in various electronic fields such as time tracking, counting pulses, and creating frequency dividers.

The specific data is subject to PDF, and the above content is for reference