MC10H125PG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC10H125PG is a logic-translator/level-shifter device that has the ability to shift logic levels between TTL and HCMOS. It can be used in many applications and has a wide variety of applications in the digital logic and data communication industries. This article will discuss the MC10H125PG application field and working principle.

The MC10H125PG is a single-channel, low-voltage HCMOS-to-TTL logic level translator. The device is intended to be used in systems that need to shift logic levels between different logic families such as HCMOS to TTL, comprising both digital logic and data communication applications. It can also be used to interface two bussed logic systems with different logic levels for increased system transmission performance. In addition, the device can provide the improved noise immunity required for reliable operation in systems operating at various dynamic current ranges.

The MC10H125PG is designed to switch between a single 5-volt TTL (Transistor-Transistor Logic) input and a single 5- or 3.3-volt HCMOS (High-Speed CMOS) output. It has an input buffer that can accept an external pullup resistor to provide a positive polarity output and an active pulldown resistor to provide a negative polarity output. The device includes over-temperature, over-voltage and over-current protection, which provides protection against events that could cause digital systems to malfunction. In addition, the device has a built-in current-limiting feature and a thermally enhanced power transistor to maintain the desired logic level across a wide range of operating temperatures.

The device is compatible with both HCMOS-III and ECL-derived logic families. It has a high input switching threshold of 1.7 volts and a low output switching threshold of 1.8 volts. It has a low-voltage operation from VDD = 2.3 to 5.5 volts, and can drive up to 200mA at 5 volts. The low slew rate of 0.4 volts/ns ensures a high noise margin and increased system transmission performance.

The MC10H125PG features a three-state output, which allows the device to be used in multipoint applications. The output can go from a high state to a low state or from a low state to a high state. In addition, the output can also be put in a high-impedance state (disabled), when the logic level of the output is not required. When the logic level of the output is not required, this three-state output feature makes it easy to switch between the two logic families without having to manually disconnect the system.

The working principle of an MC10H125PG is based on the principle of current-mode logic. This type of logic uses currents rather than voltages to represent the digital signals. A set of internal current switches controlled by the input signal is used to control the charge transfer between the input and output gates. When the input signal is high, the input current is converted to output currents that enable the output to drive the required logic levels. When the input signal is low, the input current is converted to negative output currents, which keep the output logic level low.

The MC10H125PG is ideal for applications that require the shifting of logic levels between different logic families. It is designed to operate over a wide range of voltages and currents and features an internal current-limiting feature for increased safety. The three-state output makes it easy to switch between the two logic families, and the low-voltage operation and low-slew rate of the device ensure a high noise margin and increased system transmission performance.

The specific data is subject to PDF, and the above content is for reference