MC14046BDWG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC14046BDWG, which stands for Monolithic Clock Oscillator, is a clock, or timing device that is used to generate an oscillating frequency or wave. It is a memcry-based oscillator, meaning that it uses the physical movement of a MEMORY chip to generate the timing signal, rather than an amplifier or a voltage source. It is designed to produce an oscillatory wave with a stable frequency, and is commonly used in a range of applications such as in digital clocks and watches. It is also used in microelectronic circuits, and in the generation of AM and FM radio signals.

The MC14046BDWG is a discrete component, and consists of two main components: a silicon die and a MEMORY capacitor or resistor. It is packaged in an 8-pin dual in-line plastic package (DIP). The silicon die houses the oscillator circuitry, which utilizes a MEMORY element to generate the oscillatory wave. The MEMORY capacitor is responsible for tuning the frequency of the oscillator, and also for providing stability.

The MC14046BDWG generates a high frequency sine wave, which is used to set the timing of the electronic system. The output frequency range can be adjusted from 1 MHz to 125 MHz, meaning that it can be used in ranges from microprocessor clock signals to high frequency clock pulses. The duty cycle of the generated waveform can also be adjusted, allowing for more precise control over the timing.

The MC14046BDWG is useful in a variety of applications such as in digital watches, microprocessors, cell phones, computers, radar systems, and other RF and transmission systems. In digital watches, the oscillator helps to keep the time accurate while accounting for temperature variations. In microprocessors, the oscillator determines the speed of the processor and is used to ensure that instructions are executed at the proper time intervals. In cell phones and computers, the oscillator is used to control the various communication protocols, such as Bluetooth and Wi-Fi, while in radar systems the oscillator helps to calculate the distance and velocity of the target.

The working principle of the MC14046BDWG is based on a combination of MEMORY elements and RC (resistor-capacitor) oscillators. A MEMORY element is a switchable device that consists of two plates, and a capacitive element between them. When a voltage is applied to the MEMORY element, the plates of the MEMORY element will move in opposite directions, which will increase the capacitance between them. This increases the frequency of the oscillator, and can be adjusted by the value of the MEMORY element in the circuit.

The RC oscillator works by combining a resistor and a capacitor in a simple circuit, known as an RC circuit. The capacitor allows the current to build up and discharge in a continuous cycle, while the resistor slows the rate at which this occurs. When the current is applied, it will cause the capacitor to charge and discharge in a cycle, generating a sinusoidal waveform at a frequency proportional to the time constant of the resistor-capacitor combination. By combining these two components, the MC14046BDWG can generate a stable and very precise waveform.

In summary, the MC14046BDWG is a memcry-based oscillator used in a wide range of applications, such as digital watches, microprocessors, cell phones, computers, radar systems, and other RF and transmission systems. It utilizes a combination of MEMORY elements and RC oscillators in order to generate a stable frequency waveform, and can generate frequencies ranging from 1 MHz to 125 MHz. It is a discrete component, packaged in an 8-pin dual in-line plastic package, and is designed to provide precise control over the timing of a system.

The specific data is subject to PDF, and the above content is for reference