MC14066BCPG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC14066BCPG is a 4-bit bus transceiver logic function designed to allow a 4-bit bidirectional data bus with an interface to two 2-line data buses. This integrated circuit supports both asynchronous communication and bidirectional data transmission. It is widely used in computer applications and other communication applications.

The MC14066BCPG is an upgraded version of the MC14066BC, which uses a newer technology in the form of CMOS logic. The MC14066BCPG uses a resistor-split technique that provides additional protection against unwanted signals or excessive noise. This function is not available in the MC14066BC.

It can be used to connect two buses that operate at different logic levels. It can be used to convert the logic levels from one bus to the other, allowing the two buses to communicate. This integrated circuit also provides a hardware interface for exchanging data between two buses.

The MC14066BCPG contains two 2-line buses, each with 4 data inputs and 4 data outputs. The bidirectional data bus provides 4 bits of data in each direction and the other 2-line bus provides an interface to the outside world. The two buses are connected by a set of bidirectional transceivers.

The MC14066BCPG supports different transfer rates depending on the type of signal(s) being transmitted. It can be used to send data at 10Mbit/s, 20Mbit/s, and 40Mbit/s. It also supports different signal formats such as serial, parallel, and time-division multiplexing.

The MC14066BCPG provides the necessary signal conditioning to ensure that data is transmitted and received accurately. The signal conditioning includes signal buffering and impedance matching. This feature allows the MC14066BCPG to be used in a variety of applications such as industrial automation, automotive systems, communication systems, medical systems, and many more.

The MC14066BCPG has two modes of operation: asynchronous and synchronous. In asynchronous mode the data is transmitted on both buses in both directions synchronously. In synchronous mode, the data is transmitted in both directions, but only one direction is enabled at any given time. The direction of transmission is determined by the direction control pin.

The working principle of the MC14066BCPG is based on the concept of signal conditioning. It uses the input signals to determine an output signal for transmission. The signal conditioning includes signal buffering, impedance matching, and filtering of noise. The output signal is then conditioned to the tolerance level of the receiver.

The MC14066BCPG is a versatile logic function. It can be used to interface different types of buses (serial bus, parallel bus, and time-division multiplexing). It is also suitable for carrying out data communications and data transmissions, such as asynchronous data transmission. The MC14066BCPG is an ideal solution for applications where high-speed, low-power, and reliable data transmission is required.

The specific data is subject to PDF, and the above content is for reference