MC33596FJE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC33596FJE is an integrated receiver that is part of the radio frequency (RF) receiver category. These receivers are used in a wide variety of industries including aviation, automobiles, medical, and the military. This type of receiver takes in an RF signal from an antenna, filters it, amplifies it, and then demodulates it for further use.

The MC33596FJE is specifically designed for use in short-range applications such as in ZigBee, Bluetooth, and IEEE802.15.4 systems. It has two operating bands – 433 and 868 MHz – which makes it suitable for various short-range applications.

The MC33596FJE is made up of a Low Noise Amplifier (LNA), an Intermediate Frequency (IF) Filter, a Radio Frequency (RF) Mixer, a Voltage Controlled Oscillator (VCO), and a Quasi-Synthesizer. In addition, it also has an Automatic Gain Control (AGC) to maintain a consistent signal even under varying conditions.

The LNA amplifies the incoming signal to reduce noise levels. The IF filter then filters out any undesired frequency components from the amplified signal. The RF mixer down-converts the signal from the IF filter to an intermediate frequency. The VCO is then used to generate a frequency-locked dial frequency for the demodulation of the signal. Finally, the quasi-synthesizer locks the VCO frequency for the duration of the signal.

The device is capable of an output stop-band filter that has adjustable bandwidth from 400 to 600 kHz and does not require factory tuning. Furthermore, it has a noise figure of < 4 dB and a sensitivity of -118 dBm. It also has adjustable Gain Control (AGC) to allow for a consistent, optimized signal regardless of conditions. Finally, it has an adjustable squelch circuit that can be used to reduce interfering noise.

The MC33596FJE is an ideal choice for short-range applications. Its high sensitivity and adjustable gain control enable it to receive even weak signals to provide reliable performance. Furthermore, its adjustable stop-band filter allows it to avoid interference from undesired frequency components. Finally, its adjustable squelch circuit helps reduce or eliminate noise from interfering signals.

The specific data is subject to PDF, and the above content is for reference