MC74AC4040NG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74AC4040NG is a synchronous 4-bit binary counter specifically designed to offer maximum versatility. It has synchronous reset/load, ripple carry, high speed and low propagation delay. The device is particular suited for real-time clock applications or other applications that require high speed and low propagation delay. It is suitable for both high and low voltage applications, and is easy to use.

The MC74AC4040NG falls into the category of logic counters and dividers. Counters are devices that are designed to count a specific number of clock pulses or events before outputting the accumulated value. Counters can also be used as divide-by-N counters, where the number of pulses or events is divided by a given value and the result is output. Dividers, on the other hand, are devices are used to divide a given number by a specific number.

The MC74AC4040NG is a 4-bit synchronous binary counter and based on the Motorola MC architecture. The device has four synchronous D-type flip-flops, each with independent enable, sync, load and reset pins. Each flip-flop can function as a synchronous counter, synchronous load and synchronous reset circuit with reset being activated by a high level signal. The output of each flip-flop is fed to the carry-in input of the next flip-flop, with the carry-out of the last flip-flop presenting the result of the count.

The MC74AC4040NG is designed to count four binary input clock pulses before outputting the accumulated value. The output can either be reset after four pulses or can be carried over to the next count cycle with the ripple carry feature. The device also has a clock enable pin that can be used to disable the counter or simply pause the count.

The MC74AC4040NG is a high-speed, low propagational delay counter. This is because the device is designed to count clock pulses, thus the delay between an input and the output is minimal. This makes the device suitable for real-time clock applications and other applications that require low propagation delay.

The MC74AC4040NG is ideal for low and high voltage applications. The device can operate with supply voltages ranging from 3.0V to 15V. The device is also ESD resistant, providing a layer of protection against electrostatic discharges.

The MC74AC4040NG is a versatile, high-speed, low-propagation delay device and is suitable for a wide range of applications. It is easy to use, with synchronous reset/load, ripple carry, fast count rate and low propagation delay. With its wide range of features, the MC74AC4040NG is a perfect choice for real-time clock and other applications requiring counting and division.

The specific data is subject to PDF, and the above content is for reference