MC74LCXU04DR2

Current - Output High, Low:	18mA, 16mA
Base Part Number:	74LCXU04
Package / Case:	14-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	14-SOIC
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Max Propagation Delay @ V, Max CL:	3.6ns @ 3.3V, 50pF
Logic Level - High:	1.7 V ~ 2.7 V
Logic Level - Low:	0.55V
Series:	74LCX
Current - Quiescent (Max):	10µA
Voltage - Supply:	2 V ~ 3.6 V
Features:	--
Number of Inputs:	6
Number of Circuits:	6
Logic Type:	Inverter
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74LCXU04DR2 is a logic gate composed of four independent 2-input inverters. It features low input and high output voltage levels (VIL = 0.8V, VIH = 2.0V, VOL = 0.5V, VOH = 2.4V) allowing the device to be used with TTL, CMOS, or other levels of logic. The operating temperature range is -40℃ to 85℃ with a wide supply voltage range of 2V to 6V.The MC74LCXU04DR2 is an effective tool used to isolate digital signals from noise in chip to chip and board to board communications. It is used in many different applications such as buffer logic, serial to parallel conversion, and logic controller decoding. Buffer logic applications are typically used in memory decoding which requires the output signal to be directly driven back to the primary device. Data conversion applications use the inversion capabilities to change serial data into parallel data or vice-versa. Command decoding requires the inverter’s ability to change a multi-bit signal into a single signal.The MC74LCXU04DR2 also have many advantages such as high speed operation and memory retention. The high speed operation of the gate makes it suitable for applications where fast response time is important. It also has an unlimited number of logic operations that can be performed in the same amount of time. The memory retention feature allows the gate to hold its logic state in the event of a power loss, which is essential for data retention in edge triggered applications.The MC74LCXU04DR2 consists of four 2-input inverters in a 14 pin dual-in-line package. Each inverter contains two CMOS input/output pins and a common power supply terminal. The typical pin configurations are shown in the diagram below. The four NAND gates are connected in series, with inputs A and B driving the first NAND gate and outputs Y1 and Y2 driving the second NAND gate. The third and fourth NAND gates output to the VSS and VCC pins, respectively, using the internal connection shown in the diagram.The MC74LCXU04DR2 is a low voltage, high speed logic chip, which can be used in a variety of applications. The chip has four independent inverters, so it can be used in applications such as buffer logic, serial to parallel conversion, and logic controller decoding. The low voltage and high speed operation makes this chip a good choice for applications requiring high speed response, and the memory retention feature allows for temporary data storage during power outages.The MC74LCXU04DR2 is a valuable tool for designers, where noise is present and reliable signal isolation is needed. The logic chip is available in different packages, from small and thin packages, to larger packages which will provide reliable signal isolation in high noise environments. The chip is also RoHS compliant, to meet global industry standards.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description