MC79L12ACDR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC79L12ACDR is a Low Dropout (LDO) linear voltage regulator used in a wide array of applications, including automotive, manufacturing, multimedia, home appliances and gaming. The MC79L12ACDR is a three-terminal positive voltage regulator that can provide up to 2A of current. It operates from a minimum input voltage of 3.2V and can deliver a regulated output voltage of either 3.3V, 5V or 12V, depending on the part number.

The advantages of using the MC79L12ACDR are its low dropout voltage, low quiescent current and low ground current, making it ideal for battery-powered applications. It can provide a wide range of output voltage, making it suitable for use in many different types of applications. It is also cost effective, making it attractive to designers on a budget.

The MC79L12ACDR uses the traditional three-terminal positive voltage regulation scheme to regulate its output voltage. The two main parts of the regulator are the pass transistor and the current limit circuit. The pass transistor is what controls the output voltage, while the current limit circuit controls the maximum output current.

The pass transistor is usually an N-channel MOSFET operating in linear mode. The gate of the pass transistor is driven by the external divider connected to the output voltage, known as the feedback voltage. The output voltage is set by this voltage divider and the current is allowed through the pass transistor until the output voltage reaches the desired level. The pass transistor is also current limited using a resistor.

The current limit circuit of the MC79L12ACDR is used to protect the device from damage due to excessive current. The current limit circuit consists of two transistors and a zener diode connected in parallel. The zener diode is used to detect when the output current reaches the desired level. When the current exceeds the maximum, the zener diode will cause the current limiter transistor to switch on and limit the output current.

The MC79L12ACDR is a cost-effective and reliable solution for a wide range of applications. Its low dropout voltage and low ground current make it ideal for battery-powered applications. The current limit circuit and voltage regulator provide protection from over-current, while the low quiescent current makes it suitable for applications in which energy efficiency is important. The wide range of output voltage and current ratings make it suitable for many different types of projects, from automotive to project and gaming.

The specific data is subject to PDF, and the above content is for reference