MCD162-18IO1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

thyristors are used in power control and switching applications in order to control flow of electricity. MCD162-18IO1 thyristor modules are commonly used in industrial systems.

This type of module belongs to the SCR (silicon controlled rectifier) family, which are a type of four-layerd semiconductor elctronic component. They are capable of withstanding large current and high reverse voltage and have a wide range of applications in the power control and switching areas.

The MCD162-18IO1 thyristor module has two terminals: the Anode and the Cathode. To trigger the thyristor, a triggering signal must be applied between the Gate and the Anode with a peak voltage of at least one-half of the rated value.

The MCD162-18IO1 is usually used in applications where low voltage, high power, and frequent repetition are required such as AC motor starter, heater control, lighting dimmers, air conditioning, and welding machines. In applications such as power converters, power supplies, high power switching, and AC motor control circuits, these thyristor modules are also widely used. In addition, the MCD162-18IO1 is used in industrial applications where high voltage, high-temperature, and frequent repetition are required such as inverted circuits, voltage regulator circuits, high temperature kilns, AC welding machine controllers, and semiconductor driven loads.

The working principle of the MCD162-18IO1 thyristor is based on the PNPN device structure. When a triggering pulse is applied to the Gate terminal of the MCD162-18IO1, the thyristor turns on. This causes the Anode and Cathode to be connected and current flows through the device. The current drops to a stable value when the voltage drops to zero and the thyristor is turned off. Once the current has reached a stable value, the voltage across the device is zero and the thyristor turns off.

In summary, the MCD162-18IO1 thyristor module is a power control and switching device used in various industrial systems. It has two terminals, Anode and Cathode. A triggering signal must be applied between the Gate and Anode with a peak voltage of at least one-half the rated value in order to activate the module. It is widely used in applications such as power converters, power supplies, high power switching, and AC motor control circuits. Its working principle is based on the PNPN device structure.

The specific data is subject to PDF, and the above content is for reference