MCIMX6Q5EYM10AD

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

i.MX 6Dual/6Quad processors represent the latest Comprehensive multimedia application achievements processor. These processors are part of the growing Multimedia-focused product line offering high Performance processing and optimization is minimal energy consumption. i.MX 6Dual/6Quad processors feature advanced Implementation of a quad-core Arm® Cortex®-A9 core, It runs at speeds up to 1.2 GHz. They include 2D and 3D graphics processor, 1080p video processing, and integrated power management. per processor Provides 64-bit DDR3/DDR3L/LPDDR2 memory interface and many others for connection Peripherals such as WLAN, Bluetooth®, GPS, hardware Drivers, displays and camera sensors.

2. Feature

    1. Arm Cortex-A9 MPCore 4xCPU processor with TrustZone®

    2. The core configuration is symmetric, where each core includes:

        - 32 KB L1 instruction cache

        - 32 KB L1 data cache

        - Private timer and watchdog

        - Cortex-A9 NEON MPE (Media Processing Engine) coprocessor

    3. Generic Interrupt Controller (GIC) supporting 128 interrupts

    4. Global timer

    5. Snoop Control Unit (SCU)

    6. 1 MB unified I/D L2 cache shared by two/four cores

    7. Two primary AXI (64-bit) bus interface outputs for L2 cache

    8. Core frequency (including Neon and L1 cache), as shown in Table 6.

    9. NEON MPE coprocessor

        - SIMD media processing architecture

        - NEON register file with 32x64-bit general purpose registers

        - NEON integer execution pipeline (ALU, Shift, MAC)

        - NEON double single precision floating point execution pipeline (FADD, FMUL)

        - NEON load/store and permutation pipelines

  10. Boot ROM, including HAB (96 KB)

  11. Internal multimedia/shared, fast access RAM (OCRAM, 256 KB)

  12. Secure/Non-secure RAM (16 KB)

  13. External memory interface:

        - 16-bit, 32-bit, and 64-bit DDR3-1066, DDR3L-1066, and 1/2 LPDDR2-800 channels with DDR interleaved mode support for dual x32 LPDDR2

        - 8-bit NAND flash including support for raw MLC/SLC, 2 KB, 4 KB and 8 KB page sizes, BA-NAND, PBA-NAND, LBA-NAND, OneNAND™ and more.

        - 16/32-bit NOR Flash. All EIMv2 pins are multiplexed on other interfaces.

        - 16/32-bit PSRAM, cellular RAM

  14. Hard Drive—SATA II, 3.0 Gbps

  15. Display — There are five screens available. 

        - Total native pixel rate of up to 450 across all interfaces megapixels/second, 24 bpp. Up to four interfaces can be activated in parallel.

        - One parallel 24-bit DisplayPort up to 225 Mpixels/sec

        - LVDS serial ports — one port up to 170 Mpixels/sec or two ports up to 85 MP/sec each

        - HDMI 1.4 port

        - MIPI/DSI, two lanes, 1 Gbps

  16. Camera sensor:

        - Parallel camera port

        - MIPI CSI-2 serial camera port supporting up to 1000 Mbps/lane in 1/2/3-lane mode and up to 800 Mbps/lane in 4-lane mode.

        - The CSI-2 receiver core can manage one clock channel up to Four data channels. Each i.MX 6Dual/6Quad processor has four channels.

  17. Expansion Card:

        - All four MMC/SD/SDIO card ports support:

        - 1-bit or 4-bit transfer mode specification for SD and SDIO cards up to UHS-I SDR-104 Mode (up to 104 MB/s)

        - 1-bit, 4-bit or 8-bit transfer mode specification for MMC cards up to 52 MHz in both SDRs and DDR mode (up to 104 MB/s)

  18. USB:

        - One high-speed (HS) USB 2.0 OTG (up to 480 Mbps) with integrated HS USB PHY

        - Three USB 2.0 (480 Mbps) hosts:

        - One HS host with integrated high-speed PHY

        - HS host with two integrated high-speed inter-chip (HS-IC) USB PHY

  19. Expansion PCI Express port (PCIe) v2.0 one lane

        - PCI Express (Gen 2.0) dual mode complex, supporting Root complex operations and Endpoint operations. Uses x1 PHY configuration.

  20. Miscellaneous IPs and interfaces:

        - SSI block capable of supporting audio sample frequencies up to 192 kHz stereo inputs and outputs with I2S mode

        - ESAI is capable of supporting audio sample frequencies up to 260 kHz in I2S mode with 7.1 multi channel outputs

        - Five UARTs, up to 5.0 Mbps each:

        - Providing RS232 interface

        - Supporting 9-bit RS485 multidrop mode

        - One of the five UARTs (UART1) supports 8-wire while the other four support 4-wire. This is due to the SoC IOMUX limitation, because all UART IPs are identical.

        - Five eCSPI (Enhanced CSPI)

        - Three I2C, supporting 400 kbps

        - Gigabit Ethernet Controller (IEEE1588 compliant), 10/100/10001 Mbps

        - Four Pulse Width Modulators (PWM)

        - System JTAG Controller (SJC)

        - GPIO with interrupt capabilities

        - 8x8 Key Pad Port (KPP)

        - Sony Philips Digital Interconnect Format (SPDIF), Rx and Tx

        - Two Controller Area Network (FlexCAN), 1 Mbps each

        - Two Watchdog timers (WDOG)

        - Audio MUX (AUDMUX)

        - MLB (MediaLB) provides interface to MOST Networks (150 Mbps) with the option of DTCP cipher accelerator

3. Application

    1. Netbook (web tablet)

    2. Nettops (Internet desktop devices)

    3. Advanced Mobile Internet Device (MID)

    4. High-end PDA

    5. High-end Portable Media Player (PMP) with HD video capability

    6. Game console

    7. Portable Navigation Device (PND)