MCL101A-TR3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCL101A-TR3 is a single rectifier diode package with a voltage range of 50V and chemical/mechanical standard compliant with ANSI/EIA-JESD-30. The package is designed for power applications with operating temperature range of -55°C to 125°C.

The MCL101A-TR3 is a small package size (1.16" x 1.42"), and has the capability to operate at low voltages with a low forward voltage drop of 0.3V. In addition, it features a very low reverse leakage current and a high resistance to thermal and mechanical shock. Because of its low profile, it is well suited for use in limited space applications.

The MCL101A-TR3 is an ideal choice for power rectification applications in consumer electronics, such as lighting, power supplies, and audio systems. The diode’s low forward voltage drop and low reverse leakage current make it the perfect solution for powering up circuits in a cost-effective manner. It can also be used in automotive applications, such as in power steering and other power delivery systems.

The MCL101A-TR3 rectifier diode package utilizes a PN junction to control the flow of electrical current. Current flows more easily in one direction across the junction compared to the other direction. The voltages required to control the current flow are much lower than would be needed with an equivalent resistor. This allows the diode to reduce losses due to the resistance of the device, and thus increases the power efficiency of the circuit.

Since the current flow is controlled by a PN junction, the rectifier diode needs to be connected before use. The connection should be made between one of the two diodes and a grounded output, such as the power supply’s ground. This connection allows for a DC voltage, which will act as the supply of current for the circuit, to flow through the junction from the positive side to the negative side. The MCL101A-TR3 also features two additional pins which are used to control the voltage at the junction. These pins can be adjusted to reach desired values if needed.

The current flow will be rectified as it passes through the diode, allowing the circuit to both limit the current flow in one direction, and work much more efficiently compared to an equivalent resistor. The MCL101A-TR3 is designed to suppress electrical noise produced by its own reverse recovery time, protecting the surrounding circuitry from noise peaks.

The MCL101A-TR3 rectifier diode is a great choice for cost-effective and efficient power rectification applications. Its small size and low profile make it perfect for limited-space applications, and its high tolerance for thermal and mechanical shock make it reliable. The diode is also very durable and can operate at high temperatures without losing its performance.

The specific data is subject to PDF, and the above content is for reference