MCMX60D10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays (SSRs) are a widely used, reliable and robust type of switch. SSRs use a solid state semiconductor switch such as a triac, SCR, or MOSFET to switch an electrical load on and off. This is in contrast to traditional electromechanical relays, which use a coil and mechanical contacts to make and break the circuit. Because they contain no moving parts, SSRs are much less prone to wear and tear and are capable of extremely rapid switching times. There are many types of SSRs available, each with their own strengths and weaknesses.

The MCMX60D10 is a type of solid state relay (SSR) designed for a range of applications, primarily in industrial, commercial, and consumer settings. Built with a dual-MOSFET topology, this relay combines two parallel MOSFETs into a single switch, offering high-efficiency control and low mismatching on the main power line. This SSR is designed to operate at a low range of input voltages (from 5 to 30 VDC and 0 to 24 VAC).

The MCMX60D10 board features two onboard T-type isolation transformers which provide enhanced electrical isolation between the input and output circuits. This design eliminates any type of ground fault current, resulting in higher reliability and safety for the system. Additionally, the MCMX60D10 incorporates over-current protection, overload protection, and open-circuit protection, making it suitable for high-power applications.

The MCMX60D10 is easy to use and configure. It is designed for use with commonly used industrial standards like Modbus, PLCs, and SCADA systems. The relay can be easily integrated and connected to existing systems, meaning that existing networks and installations can be upgraded with minimal effort and cost. The MCMX60D10 is also easily integrated with electronic control panels, sensors, and motors.

The solid state relay\'s main working principle is based on the insulation-piercing switching technology which allows it to suffer no arcs and arcing noise, putting very low burden on the load. This SSR uses a low-loss metal–oxide–semiconductor field-effect transistor (MOSFET) to provide the “on/off” switching for the electrical circuit. The MOSFET acts like a switch, with the voltage on it controlling the rate of current flow through the circuit. When the voltage is low, the current flow is very low and no power is delivered. When the voltage is high, the current flow is maximized and power is delivered. The MOSFET can switch rapidly from the high voltage state to the low voltage state and back, so the SSR can quickly turn the power on and off.

The MCMX60D10 solid state relay is thus a powerful, reliable, and cost-efficient choice for numerous industrial and commercial applications. Its dual-MOSFET topology and isolation transformers minimize mismatching on the main power line and provide enhanced electrical isolation. The relay can be used in a range of applications such as temperature control, motor control, lighting control, and automated switches.

The specific data is subject to PDF, and the above content is for reference