MCP2140T-I/SO

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Protocol:	IRDA®
Function:	Controller
Interface:	UART
Standards:	--
Voltage - Supply:	3 V ~ 5.5 V
Current - Supply:	2.2mA
Operating Temperature:	-40°C ~ 125°C
Package / Case:	18-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	18-SOIC
Base Part Number:	MCP2140

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

?

Introduction to MCP2140T-I/SO

The MCP2140T-I/SO is a versatile and powerful interface controller designed for a variety of applications. It was designed by Microchip Technology Inc. as part of their extensive range of integrated circuit solutions. It has several features, such as synchronous serial communication, a 10-bit ADC and PWM outputs, that make it suitable for a range of applications.

Applications of MCP2140T-I/SO

The MCP2140T-I/SO is an excellent choice for a wide variety of applications in both the commercial and the industrial sectors. Some of the applications of this controller include but are not limited to:

• Automotive: This controller is suitable for use in automotive systems, such as onboard diagnostics, instrumentation and lighting controls.
• Consumer Electronics: The MCP2140T-I/SO can also be used in many consumer electronics products such as digital radios, television sets and DVD/Blu-ray players.
• Industrial Automation: This controller can be used to control industrial machinery, sensors and actuators from a single controller.
• Industrial Power Supplies: It can be used to control the operation of industrial power supplies for a variety of industrial applications.
• Medical Devices: The MCP2140T-I/SO can be used in medical devices such as infusion pumps and medical imaging equipment, to control their operation.
• Robotics: This controller can be used in robotics and automation applications, to control and monitor the operation of robotics arms and other automated systems.

Key Features of MCP2140T-I/SO

The MCP2140T-I/SO offers many features that help it to stand out from competing products. Some of the key features include:

• 10-bit ADC: The MCP2140T-I/SO includes a 10-bit ADC, which allows it to measure and react to analog signals with greater accuracy than many other controllers.
• PWM Outputs: The controller also includes four PWM outputs, allowing it to control accessory loads or be set up to control the speed or position of motors.
• Synchronous Serial Communications: This controller includes a synchronous serial communications interface, which allows it to be connected to other devices, such as an LCD display, over a serial connection.
• Low Power Consumption: The controller is designed to be power efficient, with a low quiescent current consumption of only 0.12uA, making it suitable for use in battery-powered devices.
• Flexible Configurability: The controller is highly configurable, with many options for control, monitoring and data processing.

Working Principle of MCP2140T-I/SO

The MCP2140T-I/SO is a digital interface controller, meaning that it is controlled using digital signals. Its operation is based on the principle of synchronous serial communication, whereby the controller transmits and receives data using a serial data stream.The controller contains several components that are used to control, monitor and process data. These components include its 10-bit ADC, which is used to measure analog signals and convert them into digital signals; its PWM outputs, which control the operation of motors; and its communication interface, which allows it to be connected to other devices.To control the operation of the controller, the user must program it using the appropriate software. The software enables the user to configure the controller’s settings, such as the sampling rate and the type of data transfer protocol. Once the controller is configured, it can operate autonomously and carry out the user-defined tasks.

Conclusion

The MCP2140T-I/SO is a highly versatile and powerful interface controller that is suitable for use in a wide variety of applications. Its features, such as its 10-bit ADC, PWM outputs and synchronous serial communication interface, make it suitable for automotive, consumer electronics, industrial automation and medical devices applications. It is also highly configurable, with many options for control, monitoring and data processing. The MCP2140T-I/SO operates on the principle of synchronous serial communication, meaning that it transmits and receives data using a serial data stream.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description