MCP40D19T-103E/LT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data acquisition is an important field in modern industry, and digital potentiometers are an important component of this field. MCP40D19T-103E/LT is one such digital potentionmeter. It is a single-channel, SPI-compatible, 256-tap digital potentiometer with a precision voltage divider, ideal for data acquisition applications such as controlling audio levels, automotive sensing, and PID (proportional-integral-derivative) control.

The MCP40D19T-103E/LT operates in three modes: wiper-only, manual, and programmable. In the wiper-only mode, the user can control the position of the internal wiper contact across the resistor array through an external logic signal. This mode can be used for applications such as attenuation for digital audio or for positional feedback. In the manual mode, the user can control the position of the wiper contact using two external pins. This mode is useful for providing static voltage dividers or for configuring the device to act as a two-position switch. Finally, the programmable mode allows the user to move the wiper contact over the resistive array via the SPI bus.

The MCP40D19T-103E/LT features a low profile 12-pin package with a 4 mA maximum quiescent current, a logic-interfaced wiper control, and a wide operating voltage range of 2.7 V to 5.5 V. The device has an increment/decrement register that can be used to program the wiper position, and it also supports a programmable reset command to set the wiper position to any of the 256 available positions. The potentiometer also supports hardware shutdown, a time-out reset, and a programmable power down settling time.

The MCP40D19T-103E/LT\'s onboard voltage divider is constructed with a string of 256 resistor elements with equal resistance for each tap position. This ensures that the internal voltage regulation is repeatable over the full range of adjustment. The device also provides an end-of-calibration signal output, which can be used to indicate when the reading has completed and the system can move on to the next step.

Overall, the MCP40D19T-103E/LT digital potentiometer offers an optimal solution for a wide variety of data acquisition applications, including voltage control and feedback, current sensing and control, PID control, and digital audio applications. Its high level of control, low power consumption, and wide operating voltage range make it an ideal choice for applications requiring a high degree of precision.

The specific data is subject to PDF, and the above content is for reference