MCP4132-103E/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital potentiometers, also known as resistor arrays or potentiometer chips, are integrated circuits that have an electrical resistance that can be adjusted manually or electronically. The MCP4132-103E/P digital potentiometer is a high-accuracy, 5-bit digital potentiometer designed to provide electronic control of the resistance values within a circuit. The device has two built-in 128-position resistor arrays, a Non-Volatile Memory Position Register, and a wiper counter. It can be used with a single-supply voltage of 2.7V to 5.5V and is available in an 8-pin MSOP package.

The MCP4132-103E/P is a versatile device that can be used for a variety of data acquisition applications. Its Non-Volatile Memory Position Register allows for stored settings and maintains stored data after power cycles, making it suitable for use in applications where power cycling is required. It can also be used to replace a mechanically adjustable potentiometer or variable resistor, or as an adjustable or variable load, and can be used as a linear regulator or as a current or voltage limiter.

The MCP4132-103E/P can also be used to control analog signals such as audio volume or gain control. It can be used to interface with digital or analog sensors, or to act as a multiplexer or switch in digital communication systems. It also has the ability to provide open-drain outputs, further increasing its usability in data acquisition applications.

The MCP4132-103E/P is a 5-bit digital potentiometer and each bit represents an increment of 32 in the total number of positions of 128 available for adjustment. The device is controlled via SPI, I2C or MICROWIRE serial interfaces, with the control bits affecting the operation of the device. In the case of SPI or I2C protocols, three types of commands can be sent to control the potentiometer: wiper read, wiper write and non-volatile register write. With a MICROWIRE interface, only wiper read and wiper write commands are used.

The MCP4132-103E/P is a highly integrated device that can be used in many applications including lighting, audio and industrial control, as well as data acquisition. Its features make it extremely versatile and reliable, and it is capable of delivering reliable performance over a wide range of temperature and power cycles. The device is built for low-power operation and can be used with a range of supply voltages. It can also be used in multiple power modes, allowing it to be controlled and operated in both H-Bridge and PIC-systems.

The MCP4132-103E/P digital potentiometer is a high-accuracy device with a range of features that makes it suitable for wide range of data acquisition applications. It is ideal for use in applications that require adjustment of linear or non-linear signals, as well as adjustable voltage or current limiter. In addition, the non-volatile memory position register ensures that the stored settings are maintained even after the power is cycled, making it suitable for applications where this is required. The device offers a versatile solution for control of analog signals, digital sensors, digital communication systems, and multiplexers. Overall, the MCP4132-103E/P is a versatile device with many capabilities that make it suitable for data acquisition applications.

The specific data is subject to PDF, and the above content is for reference