MCP4151-104E/P

Memory Type:	Volatile
Base Part Number:	MCP4151
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Operating Temperature:	-40°C ~ 125°C
Resistance - Wiper (Ohms) (Typ):	75
Temperature Coefficient (Typ):	150 ppm/°C
Tolerance:	±20%
Features:	--
Voltage - Supply:	1.8 V ~ 5.5 V
Series:	--
Interface:	SPI
Resistance (Ohms):	100k
Number of Taps:	257
Number of Circuits:	1
Configuration:	Potentiometer
Taper:	Linear
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data acquisition, which is commonly referred to as DAQ, is the process of collecting and storing data for later analysis and manipulation. Digital potentiometers, or digital pots, are devices used for this purpose. The MCP4151-104E/P is a specific type of digital pot designed for precision measurement and control. In this article, we will discuss the application field of the MCP4151-104E/P, as well as its working principle.The MCP4151-104E/P is a microchip designed for applications which require accurate data acquisition and control. This chip is most commonly used in industrial systems that need to measure and control the position of a device based on an analog signal. The MCP4151-104E/P is also used in applications in biomedical engineering, automotive systems, and robotics.In addition to its industrial applications, the MCP4151-104E/P can also be used in a variety of consumer applications. This chip can be used in temperature sensors, pressure sensors, and light dimmers. It can also be used to control motor speed, turn on/off LED lights, and adjust the level of a speaker.The MCP4151-104E/P is a precision device that uses a pair of voltage dividers to convert an analog signal into a digital value. This device has two main components: a resistive element and an output schematics. The resistive element is made of a fixed resistor and a digitally controlled resistor. The fixed resistor is connected to a reference voltage, and the digitally controlled resistor is connected to the output schematics.When a voltage is applied to the resistive element, the voltage is divided between the fixed resistor and the digitally controlled resistor. The ratio of these two resistors changes depending on the digital value sent to the chip. The output schematics then receives the digital value and converts it into an analog voltage level. This voltage level can be used to accurately measure and control the position or speed of the device being monitored.The MCP4151-104E/P is a highly precise and reliable device that can be used in a variety of applications. Its accuracy, precision, and reliability make it an ideal choice for applications in industrial systems, consumer applications, medical engineering, and more. By understanding its application field and working principle, users can take advantage of the device’s many benefits and make sure that their data acquisition processes are accurate and reliable.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description