MCP41HV51-503E/MQ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP41HV51-503E/MQ, part of the Microchip voltage-controlled digital potentiometer product line is an integrated circuit designed to provide adjustable control over an analogue signal. A digital potentiometer is a non-volatile memory device that provides linear electrical resistance adjustments when triggered by a control voltage. The MCP41HV51-503E/MQ can be used for a wide range of applications, such as in data acquisition systems to provide adjustable gain, in operational amplifiers to adjust gain and offset, in adjustable voltage regulators as well as in automatic gain control (AGC) circuits and power supplies.

The MCP41HV51-503E/MQ chip contains an 8-bit nonvolatile memory function which stores a resistance setting that is activated each time the IC is powered up. The resistance is adjustable from 1k to 50k using a control voltage, 2.25 to 2.45V applied to the chip’s voltage control pin. This voltage is readily available from many digital potentiometer controllers.

The MCP41HV51-503E/MQ consists of two 256-step resistor arrays consisting of 32 resistors in each array. Each resistor element is a segment of binary-coded resistance. When the code is changed, the resistance of the device is changed because of the binary-coded MSB and the MSB+1 bits. The device can be operated in the forward or reverse direction. A programmable register stores the desired resistance. When the register is updated, the potentiometer is switched to the new resistance setting.

The MCP41HV51-503E/MQ also includes an on-chip voltage reference, which can be used to measure the absolute value of internal resistance. This is a useful feature for calibration and testing, as it helps to ensure the accuracy and repeatability of the device. The chip also includes a low offset and low drift characteristic, which enables it to provide precise control and measurement even in noisy environments. In addition, the MCP41HV51-503E/MQ features low power consumption, a wide operating temperature range, and a high sampling rate.

The MCP41HV51-503E/MQ operates in three modes: static, dynamic and analog. In static mode, the digital potentiometer is switched according to the digital inputs, which configure the device to the desired resistance value. In dynamic mode, an analog signal is used to control the resistance value; this signal is compared to an internal reference voltage and then used to adjust the resistance setting. In analog mode, the digital inputs are used to directly control the resistance value.

The MCP41HV51-503E/MQ can be used in a variety of data acquisition applications. It can be used in transducer networks, to adjust the gain of sensor-based circuits, to increase the accuracy and resolution of A/D conversions, and to filter and buffer signals. The chip can also be used as a variable gain element in audio pre-amps and other audio applications, or to adjust the voltage levels of video signals.

The MCP41HV51-503E/MQ is an ideal choice for applications that require precise regulation of analog signals. Its digital design ensures repeatability and accuracy, and it can be used in a wide range of data acquisition applications.

The specific data is subject to PDF, and the above content is for reference