MCP42050-I/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP42050-I/P is a low-power, digital potentiometer with an integrated non-volatile memory for retaining user settings. It belongs to the data acquisition field, and more specifically the Digital Potentiometers. This specification makes it the ideal choice when configuring user settings, controlling volume, or handling analog trimming.

The MCP42050-I/P offers several features including 10-bit resolution, up to 256 taps, an SPIcompatible interface and a wide operating voltage range (2.7V to 5.5V). This IC has adjustable gain and offset controls that allow it to interface with a wide range of sensors and signal sources. The integrated non-volatile memory makes it particularly well-suited for applications requiring user settings to be retained in the absence of power.

The MCP42050-I/P is designed for mounting on a printed circuit board. Its tiny 2.5mm x 2.5mm WQFN SMD package provides excellent performance in applications with tight space requirements. The surface mountable package also offers high temperature soldering compliance.

The functionality of the MCP42050-I/P is enabled by a simple, yet effective, internal architecture. The device consists of two register sets, two banks of nonvolatile memory, an up/down counter, twelve latch pins, and an analog section. The two banks of non-volatile memory make it possible to set the device\'s initial state upon powering up, while the registers and up/down counter work in tandem to control the potentiometer\'s position.

The device\'s register sets provide user control of the device\'s behavior. The first set of registers contains a write latch, a read latch and a gain latch while the second set contains a slew rate latch, a counter latch and an offset latch. Writing specific values to these registers allows the user to configure the device to match their preferences.

The twelve latch pins allow the user to control the device from a number of different sources, including a microcontroller or processor. The analog section consists of the resistive element, a reference voltage, an amplifier, and two comparators. This section can be used to adjust the setting of the potentiometer, and to monitor its position.

The operation of the MCP42050-I/P begins with power-on initialization. During this procedure, the nonvolatile memory is loaded with predetermined values and the registers are set to their default values. Once the device has been initialized, it is ready to be operated. The user can then use the registers and latch pins to set the device in the desired mode.

The MCP42050-I/P is an ideal solution for applications that require the precise control of analog variables. Its low power consumption and non-volatile memory make it an excellent choice for applications that need to retain user settings, such as volume control, or those with tight space requirements.

The specific data is subject to PDF, and the above content is for reference