MCP4261T-104E/ST

Memory Type:	Non-Volatile
Base Part Number:	MCP4261
Supplier Device Package:	14-TSSOP
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 125°C
Resistance - Wiper (Ohms) (Typ):	75
Temperature Coefficient (Typ):	150 ppm/°C
Tolerance:	±20%
Features:	--
Voltage - Supply:	1.8 V ~ 5.5 V
Series:	WiperLock™
Interface:	SPI
Resistance (Ohms):	100k
Number of Taps:	257
Number of Circuits:	2
Configuration:	Potentiometer
Taper:	Linear
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Data Acquisition - Digital Potentiometers

Digital potentiometers are a type of electronic components used in data acquisition and control systems. The MCP4261T-104E/ST is a digital potentiometer manufactured by Freescale Semiconductor, Inc. It is a low voltage, low power, dual-channel potentiometer available in several different sizes.The MCP4261T-104E/ST is a 10-bit digital potentiometer, meaning it is capable of providing a resolution of up to 1024 distinct levels of resistance between two endpoints. The part is available in an 8-pin SOIC (Small Outline Integrated Circuit) package and provides a wiper terminal for each channel. This wiper terminal can be driven from an external voltage source, or from an internal voltage regulator.The MCP4261T-104E/ST has a wide range of uses in data acquisition and control systems. It can be used to control the output of a voltage source, such as a voltage regulator, or as a variable resistor in an analog circuit. It can also be used to control the resistance of a thermal mass flow meter or used as an adjustable voltage divider.The MCP4261T-104E/ST is a simple, low-cost device that can be used in a variety of applications. It is mainly used in microcircuits and other embedded systems, to provide adjustable resistance in data acquisition and control systems. The device operates using a simple process. By controlling the voltage applied to the wiper terminals, the resistance of the device can be adjusted over a range of values. This allows the device to be used as a more accurate digital potentiometer than a standard potentiometer. In addition, the MCP4261T-104E/ST can be programmed from the host microcontroller. This is done by writing back a single digital value to its register. This process allows the microcontroller to easily adjust the resistance of the device.The MCP4261T-104E/ST is an excellent choice for a variety of data acquisition and control applications. It is a simple, low-cost device which can provide a wide range of adjustable resistances. In addition, its ability to be programmed from the microcontroller allows it to easily fit into any system. This makes the MCP4261T-104E/ST an ideal choice for any data acquisition or control system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description