MCP4331-104E/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP4331-104E/ST is one type of digital potentiometer, a device mainly used in data acquisition applications. A digital potentiometer works by varying the value of a resistance connected between three pins, known as the wiper, up and down pin. This is accomplished using an integrated circuit (IC) that contains a series of binary-weighted resistors over which the wiper is moved in order to produce a varied resistance value.

The MCP4331-104E/ST is a single-channel device, with the up and down pins located at the ends of the IC and the wiper in the middle. It has a ‘spectral’ resistance range of 0 ohms to 10k ohms, with a resolution of 27 steps. This provides a good range for digital potentiometers, as it can be used for a variety of uses, from powering LEDs to varying the response of sensors.

The MCP4331-104E/ST also features a Non-Volatile Memory (NVM). This means that the resistance values can be stored and recalled in order to create long-term resistance settings that are preserved during a power cycle. This is useful in applications where the resistance needs to be precisely set to a value and remain consistent.

The MCP4331-104E/ST is popular for a range of data acquisition applications, such as controlling the gain or signal amplification in ADC and DAC circuits or to adjust the response speed and sensitivity of sensors. A digital potentiometer is also used in some VFD displays to control the contrast. Its NVM also makes it a great solution for preserving a desired potentiometer setting even when there is no power.

The working principle behind the MCP4331-104E/ST is fairly simple. It is a digital device with a series of binary weighted resistors bridging the connection between the up and down pins. As the resistance value changes, the output of the IC changes accordingly. The wiper position determines the amount of current that is allowed to flow through the IC, which in turn increases or decreases the resistance value. This is accomplished via the use of the IC’s internal clock and control logic.

The MCP4331-104E/ST is a versatile device that is widely used for data acquisition and sensing applications. Its 27-step resolution, 0 ohm to 10k ohm resistance range and Non-Volatile Memory make it an ideal choice for a variety of tasks. It can be used to control the gain or speed of ADC and DACs, to adjust the response speed and sensitivity of sensors, and to create long-term resistant settings. It is also great for preserving resistance settings during a power cycle.

The specific data is subject to PDF, and the above content is for reference