MCP4362-103E/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP4362-103E/ST is an advanced, low-power digital potentiometer (SPI/I²C). It is often used as part of an integrated data acquisition package because it provides a vast range of configuration options and uses minimal power. By combining powerful features and a versatile voltage range, the MCP4362-103E/ST is most commonly used in applications such as measurement and control of resistance, voltage level adjustment, volume control, and circuit impedance adjustment.

The MCP4362-103E/ST is configured through a series of registers, including four bit-fields for configuring the behavior of the digitally adjustable resistance value. These bit-fields are used for setting twelve different resistance ranges, up to 6KΩ in the case of the P4362-103E/ST. In addition, four other registers are used to configure the non-linearity of the device and to enable different inverse resistance characteristics.

The MCP4362-103E/ST leverages the on-chip EEPROM to facilitate non-volatile operation, allowing it to maintain settings even when powered off. Additionally, the I²C and SPI interfaces are both integrated, making it suitable for use with a variety of data acquisition applications. The SPI interface also features interesting features, such as a hardware reset and hardware interrupt.

The MCP4362-103E/ST operates on a 5V power supply, and it includes an onboard voltage regulator. The voltage regulator can be used to support a range of the device’s operations, from low to high voltage. This makes the device well-suited for a variety of applications, including those which require a high voltage range.

When discussing the working principle of the MCP4362-103E/ST, it is important to understand the concept of analog and digital potentiometers. Analog potentiometers are essentially resistors with a adjustable resistance that can be adjusted by changing the physical position of a wiper. Digital potentiometers use an electrical signal to adjust the resistance, instead of attempting to mechanically adjust the resistance.

The MCP4362-103E/ST uses a digital wiper to adjust the internally calibrated resistor values. This allows for flexibility in controlling the resistance value, and it allows for precisely adjusted resistance values without complex or expensive mechanical components.

The MCP4362-103E/ST also offers several features that make it suitable for data acquisition applications. For instance, the device includes a digital signal interface, which is capable of high-speed, low-latency signal processing. Additionally, the device features integrated RAM and EEPROM, allowing for stored data and settings that can be maintained even when power is removed.

Overall, the MCP4362-103E/ST offers an impressive combination of flexibility and power efficiency, making it an excellent choice for data acquisition applications. Its low-power operation and wide voltage range make it suitable for both simple and complex applications. With its versatile range of configuration options, advanced signal processing capabilities and non-volatile memory, the MCP4362-103E/ST is well suited for a variety of applications.

The specific data is subject to PDF, and the above content is for reference