MCP4431T-104E/ML

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP4431T-104E/ML is a dual-channel, 8-bit digital potentiometer, which is a part of Microchip Technology\'s Data Acquisition - Digital Potentiometers range. It is capable of providing the user with a variable resistor solution, with a connection range of 10kΩ to 100kΩ, and a linear resolution of 256 taps. The MCP4431T also offers the user with non-volatile non-volatile memory in the form of an EEPROM, as well as a user power-on reset feature, offering a smooth operating experience with any device.

The MCP4431T is a digital potentiometer that can be used in various applications such as motor control, sensor signal conditioning, audio controllers, and digital volume control. The device provides the user with flexibility for controlling resistance values between two digital pins, offering 256 stages of linear resolution within a range from 10kΩ to 100kΩ. The resistance values can be adjusted via a simple serial command transfer. Additionally, the device includes an EEPROM for saving the required resistance value, and it also has the ability to reset itself upon the power-on cycle.

The MCP4431T-104E/ML is designed to be connected via SPI, making it easy to connect to a host processor and receive commands. The SPI bus is a synchronous serial interface designed to communicate with embedded controllers and other microcontrollers. The interface is made up of three pins: Clock, Data In, and Data Out. The SPI controller transmits the command bits in a series of clock pulses – the microcontroller then returns the relevant command instruction.

In terms of its working principle, the MCP4431T-104E/ML digital potentiometer is basically an R-2R resistor ladder circuit. The 256 tap points are created by connecting resistors of two different values, RΩR and 2RΩR. When a logic high (1) is applied to the digital-in pin, the resistor RΩR supplies 0.5V, resulting in the fact that the voltage at the digital-out pin is 0V. When a logic low (0) is applied to the digital-in pin, the resistor 2RΩR supplies 0V, resulting in the fact that the voltage at the digital-out pin is 0V.

In addition to the above working principle, the MCP4431T-104E/ML digital potentiometer is also equipped with an 8-bit non-volatile EEPROM. This means that it is capable of storing the desired resistance settings and thereby allowing the device to reset to the preprogrammed resistance levels upon power up. As such, the user is able to fine tune their device for any application, avoiding costly resistor replacements.

The device is capable of operating at a supply voltage between 2.7V-12V, as well as offering a low power consumption of around 75 μA during operation. This helps to make the device a great choice for power-sensitive applications, as it ensures minimal power consumption. The device also comes with an adjustable shutdown feature, which switches off the resistor ladder when not in use, helping to save additional power.

Overall, the MCP4431T-104E/ML is a versatile 8-bit Digital Potentiometer, offering flexibility and cost savings. Its combination of precision control and low power consumption makes it suitable for a range of applications from motor control to audio controllers, making it useful for anyone looking for an easy-to-integrate dynamic resistor solution.

The specific data is subject to PDF, and the above content is for reference