MCP4542-502E/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCP4542-502E/MS is a member of the Data Acquisition - Digital Potentiometers family. This device provides a high resolution, non-volatile, digitally controlled potentiometer, used in a wide range of industrial automation applications such as motor control, robotics, precision potentiometers, vibrometry and transducer control. The device is designed for use in such applications requiring digital control and a high resolution of control.

The device consists of two 8-bit variable-length resistors, with a maximum value of 10K ohms. Each variable-length resistor can be digitally programmed using digital serial protocol. The whole device can thus be controlled with only three control lines, namely the clock, data, and chip select lines. This makes it possible to control the device in multiplexed applications, such as motor controllers, robotic control systems, etc.

The device also contains a charge pump which allows it to operate in extended-temperature ranges, as well as harsh environments. The charge pump also functions as a reference voltage generator, which can be used to match the reference voltage of the device, ensuring accuracy in its operation. The device features low power consumption, resulting in low heat dissipation.

The device operates by inputting a digital word via the serial port to the “programmable value” register. This sets the desired value of the variable-length resistor. Once this is done, the preset value can be read back from the same register.

The device also allows programming of the DAC resolutions and pot resolution. For example, the pot resolution can be programmed from 0 to 255, with increments of 1. This allows the user to have fine control over the output resolution, making the device suitable for applications with high-precision, such as that of robotics.

The MCP4542-502E/MS also features a programmable counter that allows the user to set up a programmable debounce timer for various motor and robot applications. This feature allows the user to set up low, medium, and high-resolution counters, based on the desired application.

The device also has built-in analog-to-digital convert (ADC) circuitry, allowing the user to measure the output from the variable-length resistor. This feature also makes it possible to control the variable-length resistor using a serial user interface, such as an I2C or SPI interface.

The MCP4542-502E/MS device is also designed to handle automated calibration. This helps the user to ensure accuracy and precision, even in harsh or fast-changing environments with varying temperatures or other variables. The device also features a power-on reset feature, which helps to ensure the device’s accuracy.

Overall, the MCP4542-502E/MS device is an excellent choice for applications requiring a high-resolution and well-controlled digital potentiometer. Its features such as low power consumption, programmable resolution, and power-on reset, make it suitable for a wide range of applications, including motor control, robotics, precision potentiometers, vibrometry, and transducer control.

The specific data is subject to PDF, and the above content is for reference