MCP4631T-104E/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition is the process of measuring, storing, and managing digital data to represent physical signals from a target source. Digital Potentiometers are devices used for the digital measurement of the resistance values of potentiometers. The MCP4631T-104E/ST is a Digital Potentiometer in a Through Hole MSOP-8EP package,and it is a GND-referenced digital potentiometer with non-volatile memory.

MCP4631T-104E/ST application field includes a broad range of applications, such as controlling and adjusting any device that need a fixed or variable resistance. Some of these current applications include automotive and industrial equipment, control systems, and audio. This MicroChip product supports The SPI, I2C and Serial Standard Bus interfaces, and has a typical temperature range of -40C to 85C.

Working Principle of MCP4631T-104E/ST is based on the Potentiometer concept. The MCP4631T-104E/ST has three pins, which are GND, VDD and DATA. When any voltage is applied to the VDD pin,the DATA pin will output different digital signals with the change of the voltage. Values obtained from the digital potentiometer based on the voltage applied across it can be programmed and stored into its non-volatile memory. This feature gives the user the control of the application without manually adjusting the digital potentiometer after every power cycle.

The digital potentiometer has an internal register which stores the data received from the DATA pin. Whenever a voltage is applied to the DATA pin,the voltage reading will be displayed on the internal register. This data can be read and programmed using the SPI, I2C and Serial Standard Bus interfaces, and stored in the non-volatile memory. The value in the register will never change unless it is programmed again. This feature is especially useful when combined with safety-related systems.

The MCP4631T-104E/ST also has an enable pin. This pin is used to enable or disable the digital potentiometer. When the enable pin is set to “LOW”, the digital potentiometer is disabled and the data will not be stored in the internal register. When the enable pin is set to “HIGH”,the digital potentiometer is enabled and the data can be stored in the internal register. The enable pin should always be set to “HIGH” for normal operation.

MCP4631T-104E/ST also has a “Busy” pin, which indicates when the device is busy. When the “Busy” pin is set to “LOW”, the device is working normally. When the “Busy” pin is set to “HIGH”,the device is busy performing tasks such as programming or writing to the internal register. This feature is useful for monitoring the progress of the device.

In summary, the MCP4631T-104E/ST is a Digital Potentiometer in an MSOP-8EP package. It is an extremely versatile device that can be used in a broad range of applications. It has an internal register which stores the data received from the DATA pin, a busy pin which signals when the device is busy, and an enable pin which can be used to enable or disable the device. The device has been designed to be rugged and durable, making it suitable for many different applications.

The specific data is subject to PDF, and the above content is for reference