MCP4632T-502E/UN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data acquisition (DAQ) is the process of measure, signal conditioning, analysis and recording of physical characteristics such as temperature, pressure, flow and voltage. Digital potentiometers, also known as digipots, are used in data acquisition systems as voltage-divider configured potentiometers. The MCP4632T-502E/UN is an example of a digital potentiometer designed for a range of applications.

Essentially a digi-pot consists of two parts; an analog output stage providing an adjustable DC output voltage, and a digital input stage for programming or adjusting a setpoint voltage. MCP4632T-502E/UN digi-pot is a multi-purpose digital potentiometer with two independent and separately adjustable outputs. Each output can be programmed in 128 step increments with the help of a single digital input. With the help of the digital input, it is also possible to set the outputs to zero. It also has an internal temperature sensor to enable the temperature compensation function to maintain an accurate output voltage.

The MCP4632T-502E/UN digi-pot is a non-volatile device. It is designed for high volume, cost-sensitive application requiring high performance and flexibility. It is an excellent choice for embedded control systems for motor control, programmable analog output or adjustable power supplies. The device is also used in audio and video production systems, robotics and automotive applications.

The MCP4632T-502E/UN digi-pot is a three-terminal, non-volatile, digital potentiometer that can be programmed with a digital input (typically SPI digital interface). The output voltage is programmed through the wiper pins that are connected to a set of resistors, connected as a voltage divider network. The output voltage is determined by the tap value. The tap value is set by the corresponding serial input, typically a 10-bit binary value. The device also has two dedicate inputs for wiper control, to allow independent control of the two outputs. This is useful in two-channel control applications.

The MCP4632T-502E/UN digi-pot can be easily programmed for many different applications. For example, it can be used to adjust a tuning capacitor for a radio, adjust the attenuation of a signal, or as a variable voltage power supply. It can also be used to select different amplifier gains by setting the output voltage, or to adjust the DC output level of an audio system.

The working principle of the MCP4632T-502E/UN digi-pot is based on the voltage divider principle. When a voltage is applied to the wiper terminal, the tap value is determined and the output voltage is adjusted accordingly. The digital input provides the tap value, which is then converted to an analog value and applied to the voltage divider network. The output voltage is then determined by the tap value set by the digital input. The device also has a temperature sensor built-in, to enable temperature compensation for output voltage stability.

The MCP4632T-502E/UN digi-pot is an ideal choice for many applications requiring a highly accurate and repeatable DC output voltage. It is a very versatile device that can be programmed with a digital interface and provides single or dual output options. With its low power consumption and wide operating range, the device is well suited for embedded control and portable system applications.

The specific data is subject to PDF, and the above content is for reference