MCP48FVB02T-E/UN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DACs) are used for converting digital signals into their analog representation. The MCP48FVB02T-E/UN is a specific type of DAC that is capable of providing a higher current output than other typical DACs. This makes the MCP48FVB02T-E/UN suitable for applications that require higher current output.

Due to the high output of the MCP48FVB02T-E/UN and its precision conversion capability, it is often used in applications such as medical instrumentation, military systems, telecommunications, consumer electronics, industrial automation and automotive systems. The MCP48FVB02T-E/UN chip can also provide improved performance in complex power systems due to its low quiescent current and high output supply current.

The MCP48FVB02T-E/UN is an 8-bit, single-channel DAC that operates over a voltage range of 1.4V to 5.5V. It is composed of an 8-bit buffered voltage output, an 8-bit current output and two error flags. The 8-bit current output is provided by a complementary voltage output with a resolution of 8 bits, allowing for an output of up to 4mA. The buffered voltage output is a low-power output option that is configurable for either a logic high or logic low output. The 8 bit voltage output is suitable for interfacing to bridge amplifiers and analog negative feedback circuits.

The MCP48FVB02T-E/UN also features an internal oscillator and reference register, a write selector and enable control, and active/stand-by enable control. The internal oscillator allows the DAC to be configured to be either clocked by an external clock source or driven by its internal oscillator. The reference register can be programmed with a range of voltages such as 0 to 8V in order to support different types of applications.

The programming of the MCP48FVB02T-E/UN is done through its digital control pins. These pins take either digital words or serial data. The data is loaded into the registers and then converted into an analog output voltage which is then sent out of the output pin. The output is continuous, meaning the DAC will continue to output the same signal until it is reprogrammed.

In terms of the security and signal integrity of the digital signals, the MCP48FVB02T-E/UN includes a built in thermal shutdown feature for protection against short and open circuit conditions. Additionally, it has built in EMI/RFI control circuitry, as well as a programmable slew rate control and low-noise amplifier to ensure high signal fidelity and minimal EMI/RFI emissions.

In summary, the MCP48FVB02T-E/UN is a single channel 8-bit DAC suitable for use in a variety of applications. Its features include an 8-bit buffered voltage output, an 8-bit current output, an internal oscillator, reference register, write selector, active/stand-by enable control, thermal shutdown protection, EMI/RFI protection circuitry, programmable slew rate control and low-noise amplifier. Taking all of these features into account, the MCP48FVB02T-E/UN is an excellent choice for applications that require higher current output and precision conversion capability.

The specific data is subject to PDF, and the above content is for reference