MCP6071-E/SN

Current - Input Bias:	1pA
Base Part Number:	MCP6071
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	1.8 V ~ 6 V
Current - Supply:	110µA
Voltage - Input Offset:	150µV
Series:	--
Gain Bandwidth Product:	1.2MHz
Slew Rate:	0.5 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MCP6071-E/SN Application Field and Working Principle

The MCP6071-E/SN is an instrumentation amplifier that can be used for a range of applications in linear electronics. It is an integrated circuit made of discrete components which is designed for use as a low noise, high precision differential gain amplifier.

Features

The MCP6071-E/SN has excellent linearity, low offset voltage and low noise characteristics that make it ideal for use in precision linear instrumentation applications. The differential input voltage range of the device is ±15V, while the input common mode range is -15V to +30V. The maximum gain is adjustable between 10 and 200 using external resistors. The MCP6071-E/SN has a typical open loop gain of 120dB and a wide bandwidth of 1MHz. It is a Unipolar device, meaning it is capable of amplifying only positive input signals.

Applications

The MCP6071-E/SN can be used in a number of applications in linear electronics. It can be used as a low noise instrumentation amplifier, such as in medical sensors or ultrasound circuits. It is also suitable for low noise analog-to-digital converters and for dc analysis of power supplies. It can also be used for precision temperature measurements, low noise remote control receivers, electrometer and datalogger amplifier circuits.

Working Principle

The MCP6071-E/SN is a two stage instrumentation amplifier with fully differential input and output stages. The differential inputs of the amplifier are connected directly to the non-inverting and inverting input pins of the op-amp. The gain of the amplifier is determined by the ratio of the resistors connected between the inverting and non-inverting inputs, and between the output and the non-inverting input. The output of the amplifier is connected to a common mode feedback loop, which ensures that output stays within the common mode range. This also ensures the desired gain is maintained. The MCP6071-E/SN is ideal for use in precision linear instrumentation applications as it has excellent linearity and low noise capabilities. It is also cost effective and can be used for a range of applications such as medical sensors, ultrasound circuits, analog-to-digital converters and dc analysis. The MCP6071-E/SN is a two stage instrumentation amplifier with a differential input and output stages, with the gain being determined by the ratio of resistors connected between the inverting and non-inverting inputs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description